參數資料
型號: LTC2495CUHF#PBF
廠商: Linear Technology
文件頁數: 19/34頁
文件大?。?/td> 0K
描述: IC ADC 16BIT W/PGA 38-QFN
標準包裝: 52
位數: 16
采樣率(每秒): 15
數據接口: I²C,串行
轉換器數目: 1
功率耗散(最大): 480µW
電壓電源: 單電源
工作溫度: 0°C ~ 70°C
安裝類型: 表面貼裝
封裝/外殼: 38-WFQFN 裸露焊盤
供應商設備封裝: 38-QFN(5x7)
包裝: 管件
輸入數目和類型: 16 個單端,雙極;8 個差分,雙極
配用: DC1012A-C-ND - BOARD DELTA SIGMA ADC LTC2495
LTC2495
2495fd
current. This current, nominally 1nA (±10nA max), results
in a small offset shift. A 1k source resistance will create a
1V typical and a 10V maximum offset voltage.
Automatic Offset Calibration of External Buffers/
Amplifiers
In addition to the Easy Drive input current cancellation,
the LTC2495 allows an external amplifier to be inserted
between the multiplexer output and the ADC input (see
Figure 12). This is useful in applications where balanced
source impedances are not possible. One pair of external
buffers/amplifiers can be shared between all 17 analog
inputs.TheLTC2495performsaninternaloffsetcalibration
every conversion cycle in order to remove the offset and
drift of the ADC. This calibration is performed through a
combination of front-end switching and digital process-
ing. Since the external amplifier is placed between the
multiplexer and the ADC, it is inside this correction loop.
This results in automatic offset correction and offset drift
removal of the external amplifier.
The LTC6078 is an excellent amplifier for this function.
It operates with supply voltages as low as 2.7V and its
noise level is 18nV/√Hz. The Easy Drive input technology
of the LTC2495 enables an RC network to be added directly
to the output of the LTC6078. The capacitor reduces the
magnitude of the current spikes seen at the input to the
ADC and the resistor isolates the capacitor load from the
op amp output enabling stable operation. The LTC6078
can also be biased at supply rails beyond those used by
the LTC2495. This allows the external sensor to swing rail-
to-rail (–0.3V to VCC + 0.3V) without the need of external
level-shift circuitry.
Reference Current
Similar to the analog inputs, the LTC2495 samples the
differential reference pins (REF+ and REF) transferring
small amounts of charge to and from these pins, thus
producing a dynamic reference current. If incomplete set-
tling occurs (as a function the reference source resistance
andreferencebypasscapacitance)linearityandgainerrors
are introduced.
Forrelativelysmallvaluesofexternalreferencecapacitance
(CREF< 1nF), the voltage on the sampling capacitor settles
for reference impedances of many k
W (if CREF = 100pF up
to 10k
W will not degrade the performance (see Figures
13 and 14)
).
In cases where large bypass capacitors are required on
the reference inputs (CREF > 0.01F), full-scale and linear-
ity errors are proportional to the value of the reference
resistance. Every ohm of reference resistance produces
a full-scale error of approximately 0.5ppm
(while operat-
ing in simultaneous 50Hz/60Hz mode (see Figures 15
and 16)
). If the input common mode voltage is equal to
the reference common mode voltage, a linearity error of
approximately 0.67ppm per 100
W of reference resistance
Figure 13. +FS Error vs RSOURCE at VREF (Small CREF)
Figure 14. –FS Error vs RSOURCE at VREF (Small CREF)
applications inForMation
RSOURCE ( )
0
+FS
ERROR
(ppm)
50
70
90
10k
2495 F13
30
10
40
60
80
20
0
–10
10
100
1k
100k
VCC = 5V
VREF = 5V
VIN+ = 3.75V
VIN– = 1.25V
fO = GND
TA = 25°C
CREF = 0.01F
CREF = 0.001F
CREF = 100pF
CREF = 0pF
RSOURCE ( )
0
–FS
ERROR
(ppm) –30
–10
10
10k
2495 F14
–50
–70
–40
–20
0
–60
–80
–90
10
100
1k
100k
VCC = 5V
VREF = 5V
VIN+ = 1.25V
VIN– = 3.75V
fO = GND
TA = 25°C
CREF = 0.01F
CREF = 0.001F
CREF = 100pF
CREF = 0pF
相關PDF資料
PDF描述
LTC2496IUHF#TRPBF IC ADC 16BIT DELTA SIG 38-QFN
LTC2498IUHF#TRPBF IC ADC 24BIT 16CH 38-QFN
LTC2600IUFD#PBF IC DAC OCTAL R-R 16BIT 20-QFN
LTC2602IMS8#TRPBF IC DAC 16BIT DUAL R-R VOUT 8MSOP
LTC2604IGN-1#TRPBF IC DAC 16BIT QUAD R-R OUT 16SSOP
相關代理商/技術參數
參數描述
LTC2495IUHF#PBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2495IUHF#TRPBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
LTC2496CUHF#PBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2496CUHF#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2496IUHF#PBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494