Questions in the Configuration Utility
5-7
The following information determines how many MPIO/MPLED pins to allocate for the number of
speakers, door locks, fans, power supplies, device slots, and temperature devices in a specific
enclosure, as well as Global Flags.
Is there a controllable speaker
Enter
y
or
n
.
Is there a monitorable speaker
This question appears only if you replied no to the
question about a controllable speaker. Enter
y
or
n
.
Is there a controllable door lock
Enter
y
or
n
.
Is there a monitorable door lock
This question appears only if you replied no to the
question about a controllable door lock. Enter
y
or
n
.
Is there a Global Identify Enclosure LED
Enter
y
or
n
. If yes, this will drive an LED to the
identify enclosure signal. (Send Global Flags
command).
Is there a Global Enclosure Status LED
Enter
y
or
n
. If yes, this will drive an LED to
indicate an error condition of global failure or
global warning (Send Global Flags command).
Is there a Global Drive Status LED
Enter
y
or
n
. If yes, this will drive an LED to
indicate a drive error condition of drive failure or
drive warning (Send Global Flags command).
Is there a Global Array Status LED
Enter
y
or
n
. If yes, this will drive an LED to
indicate an array error condition or array failure or
array warning (Send Global Flags command).
Table 5.3
Enclosure Components Questions
Question
Explanation
These questions relate to HOW MANY various elements are in the enclosure.
How many fans supplying a single wire input do
you want to support
Enter the number of fans in the enclosure that
have one MPIO pin assigned for status. This
allows up to two states to be determined for fan
status. Up to six fans can be specified.
How many fans supplying a dual wire input do
you want to support
Enter the number of fans in the enclosure that
have two MPIO pins assigned for status. This
allows up to four states to be determined for fan
status. Up to six fans can be specified.
Table 5.2
General Questions (Cont.)
Question
Explanation/Required Input