![](http://datasheet.mmic.net.cn/230000/LMX9820ASMX_datasheet_15593845/LMX9820ASMX_29.png)
Revision 1.0
29
www.national.com
L
12.0 Command Interface
(Continued)
Table 34. Power Mode Commands
Command
Event
Description
Set Default Link Policy
Set Default Link Policy Confirm
Defines the link policy used for any incoming
or outgoing link.
Get Default Link Policy
Get Default Link Policy Confirm
Returns the stored default link policy
Set Link Policy
Set Link Policy Confirm
Defines the modes allowed for a specific link
Get Link Policy
Get Link Policy Confirm
Returns the actual link policy for the link
Enter Sniff Mode
Enter Sniff Mode Confirm
Exit Sniff Mode
Exit Sniff Mode Confirm
Enter Park Mode
Enter Park Mode Confirm
Enter Hold Mode
Enter Hold Mode Confirm
Power Save Mode Changed
Remote device changed the power save
mode on the link
Table 35. Audio Control Commands
Command
Event
Description
Establish SCO Link
Establish SCO Link Confirm
Establish SCO link on existing RFComm
link
Release SCO Link
Release SCO Link Confirm
Release SCO link
SCO Link Established Indicator
A remote device has established a SCO
link to the local device
SCO Link Released Indicator
SCO link has been released
Change SCO Packet Type
Change SCO Packet Type Confirm
Changes packet type for existing SCO link
SCO Packet Type changed indicator
SCO packet type has been changed
Set Audio Settings
Set Audio Settings Confirm
Set audio settings for existing link
Get Audio Settings
Get Audio Settings Confirm
Get audio settings for existing link
Set Volume
Set Volume Confirm
Configure the volume
Get Volume
Get Volume Confirm
Get current volume setting
Mute
Mute Confirm
Mutes the microphone input
Table 36. Wake Up Function Commands
Command
Event
Description
Disable Transport Layer
Transport Layer Enabled
Disabling the UART transport layer and
activates the hardware wake-up function