參數資料
型號: LM75AD,112
廠商: NXP Semiconductors
文件頁數: 23/24頁
文件大小: 137K
描述: IC TEMP SENSOR DIGITAL 8-SOIC
特色產品: NXP - I2C Interface
標準包裝: 100
功能: 溫度監視系統(傳感器),監視器
傳感器類型: 內部
感應溫度: -55°C ~ 125°C
精確度: ±3°C(最小值)
拓?fù)洌?/td> ADC(三角積分型),比較器,振蕩器,寄存器庫
輸出類型: 2 線串行,I²C?
輸出警報:
輸出風扇:
電源電壓: 2.8 V ~ 5.5 V
工作溫度: -55°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: 8-SOIC(0.154",3.90mm 寬)
供應商設備封裝: 8-SO
包裝: 管件
產品目錄頁面: 846 (CN2011-ZH PDF)
配用: 568-4002-ND - DEMO BOARD I2C
其它名稱: 568-4226-5
935269775112
LM75AD
LM75AD-ND
LM75A_4
?NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 04  10 July 2007
23 of 24
NXP Semiconductors
LM75A
Digital temperature sensor and thermal watchdog
17. Legal information
17.1   Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term short data sheet is explained in section Denitions.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
http://www
.nxp
.com.
17.2   Denitions
Draft  The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet  A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
ofce. In case of any inconsistency or conict with the short data sheet, the
full data sheet shall prevail.
17.3   Disclaimers
General  Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes  NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use  NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customers own risk.
Applications  Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specied use without further testing or modication.
Limiting values  Stress above one or more limiting values (as dened in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale  NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at
http://www
.nxp
.com/pro
le/ter
ms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license  Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
17.4   Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I
2
C-bus  logo is a trademark of NXP B.V.
18. Contact information
For additional information, please visit:
http://www
.nxp.com
For sales ofce addresses, send an email to:
salesad
dresses@nxp.com
Document status
[1]
[2]
Product status
[3]
Denition
Objective [short] data sheet
Development
This document contains data from the objective specication for product development.
Preliminary [short] data sheet   Qualication
This document contains data from the preliminary specication.
Product [short] data sheet
Production
This document contains the product specication.
相關PDF資料
PDF描述
LM75BD,112 IC TEMP SENSOR DIGITAL 8-SOIC
LM75BIMX-5+ IC TEMP SENSOR WATCHDOG 8SOIC
LM92CIMX/NOPB IC SENSOR TEMP/THERM COMP 8-SOIC
LT1123CST#TRPBF IC REG CTRLR SGL 5V SOT223
LT1248IS#PBF IC PFC CTRLR AVERAGE CURR 16SOIC
相關代理商/技術參數
參數描述
LM75ADP 制造商:NXP Semiconductors 功能描述:Digital Temp Sensor 2-Wire,LM75ADP
LM75ADP,118 功能描述:板上安裝溫度傳感器 TEMP SENSOR DIGITAL RoHS:否 制造商:Omron Electronics 輸出類型:Digital 配置: 準確性:+/- 1.5 C, +/- 3 C 溫度閾值: 數字輸出 - 總線接口:2-Wire, I2C, SMBus 電源電壓-最大:5.5 V 電源電壓-最小:4.5 V 最大工作溫度:+ 50 C 最小工作溫度:0 C 關閉: 安裝風格: 封裝 / 箱體: 設備功能:Temperature and Humidity Sensor
LM75ADP,118 制造商:NXP Semiconductors 功能描述:IC, TEMP SENSOR, 0.125C, 3C, TSSOP-8
LM75ADP,118-CUT TAPE 制造商:NXP 功能描述:LM75A Series SMD 5.5 mA Digital Temperature Sensor w/ Thermal Watchdog TSSOP-8
LM75ADP/DG,118 功能描述:板上安裝溫度傳感器 DIGITAL TEMP SENSOR AND THERMAL WATCHDOG RoHS:否 制造商:Omron Electronics 輸出類型:Digital 配置: 準確性:+/- 1.5 C, +/- 3 C 溫度閾值: 數字輸出 - 總線接口:2-Wire, I2C, SMBus 電源電壓-最大:5.5 V 電源電壓-最小:4.5 V 最大工作溫度:+ 50 C 最小工作溫度:0 C 關閉: 安裝風格: 封裝 / 箱體: 設備功能:Temperature and Humidity Sensor