- 您現在的位置：買賣IC網 > PDF目錄67756 > LM2635M/NOPB (NATIONAL SEMICONDUCTOR CORP) SWITCHING CONTROLLER, 350 kHz SWITCHING FREQ-MAX, PDSO20 PDF資料下載
參數資料
| 型號： | LM2635M/NOPB |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 穩壓器 |
| 英文描述： | SWITCHING CONTROLLER, 350 kHz SWITCHING FREQ-MAX, PDSO20 |
| 封裝： | PLASTIC, SOP-20 |
| 文件頁數： | 13/13頁 |
| 文件大?。?/td> | 734K |
| 代理商： | LM2635M/NOPB |
Applications Information (Continued)
The control-to-output transfer function is
The ESR zero frequency is:
The power stage double pole frequency is:
The corresponding Bode plots are shown in Figure 5.
Since the ESR zero frequency is so low, it effectively cancels
the phase shift from one of the power stage poles. This limits
the total phase shift to 90%.
Although this regulator design is stable (phase shift is <90
when gain = 0dB), it needs compensation to improve the DC
gain and cut off frequency (0dB frequency). Otherwise, the
low DC gain may cause a poor line regulation, and the low
cutoff frequency will hurt transient response performance.
The transfer function for the 2-pole-1-zero compensation
network shown in Figure 4 is:
where
One of the poles is located at origin to help achieve the
highest DC gain. So there are three parameters to deter-
mine, the position of the zero, the position of the second
pole, and the constant A. To determine the cutoff frequency
and phase margin, the loop bode plots need to be gener-
ated. The loop transfer function is:
TF = TF1 x TF2
By choosing the zero close to the double pole position and
the second pole to half of the switching frequency, the closed
loop transfer function turns out to be very good.
That is, if f
Z = 1.32 kHz, fP = 153 kHz, and A = 4.8 x 10
6
F,
then the cutoff frequency will be 50 kHz, the phase margin
will be 72, and the DC gain will be that of the error amplifier.
See Figure 6 below.
The compensation network component values can be deter-
mined by the following equations:
Notice there are three equations but four variables. So one
of the variables can be chosen arbitrarily. Since the current
10011913
FIGURE 5. Control-to-Output Bode Plots
10011917
FIGURE 6. Loop Bode Plots
LM2635
www.national.com
9
相關PDF資料 |
PDF描述 |
|---|---|
| LM2676SDX-12/NOPB | 5.4 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2678LD-12 | 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2678LDX-5.0 | 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2678LD-3.3 | 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2678LD-5.0 | 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LM2635MX | 功能描述:IC REG SYNCH BUCK 5-BIT 20-SOIC RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 應用說明:Ultrasound Imaging Systems Application Note 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:37 系列:- 應用:醫療用超聲波成像，聲納 電流 - 電源:- 電源電壓:2.37 V ~ 6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:56-WFQFN 裸露焊盤 供應商設備封裝:56-TQFN-EP（8x8） 包裝:管件 |
| LM2635MX/NOPB | 制造商:Texas Instruments 功能描述:Conv DC-DC Single Step Down 20-Pin SOIC W T/R |
| LM2636 | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:5-Bit Programmable Synchronous Buck Regulator Controller |
| LM2636A E WAF | 制造商:Texas Instruments 功能描述: |
| LM2636AM E WAF | 制造商:Texas Instruments 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。