參數資料
型號： KSZ8851-16MLLI
廠商： Micrel Inc
文件頁數： 21/84頁
文件大?。?/td> 0K
描述： IC MAC CTLR 1PORT W/BUS 48-TQFP
標準包裝： 250
控制器類型： 以太網控制器，MAC/PHY
接口： 總線
電源電壓： 1.8V，2.5V，3.3V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 48-LQFP
供應商設備封裝： 48-LQFP（7x7）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
其它名稱： 576-3505
Micrel, Inc.
KSZ8851-16MLL/MLLI
March 11, 2014
28
Revision 2.2
Driver Routine for Transmit Packet from Host Processor to KSZ8851-16MLL
The transmit routine is called by the upper layer to transmit a contiguous block of data through the Ethernet controller. It is
user’s choice to decide how the transmit routine is implemented. If the Ethernet controller encounters an error while
transmitting the frame, it’s the user’s choice to decide whether the driver should attempt to retransmit the same frame or
discard the data. The following Figures 7 shows the step-by-step for single transmit packets from host processor to
KSZ8851-16MLL.
Figure 7. Host TX Single Frame in Manual Enqueue Flow Diagram
Host receives an Ethernet pkt from
upper layer and prepares transmit pkt
data (data, data_length, frame ID).
The transmit queue frame format is
shown in Table 5
Check if KSZ8851M TXQ
Memory size is available for this
transmit pkt?
(Read TXMIR Reg)
Write an “1” to RXQCR[3] reg to enable
TXQ write access, then Host starts
write transmit data (control word, byte
count and pkt data) to TXQ memory.
This is moving transmit data from Host
to KSZ8851M TXQ memory until whole
pkt is finished
Write an “0” to RXQCR[3] reg to end
TXQ write access
Write an “1” to TXQCR[0] reg to issue a
transmit command (manual-enqueue)
to the TXQ. The TXQ will transmit this
pkt data to the PHY port
Option to Read ISR[14] reg, it indicates
that the TXQ has completed to transmit
at least one pkt to the PHY port, then
Write “1” to clear this bit
Yes
No
Write the total amount of TXQ buffer
space which is required for next
transmit frame size in double-word
count in TXNTFSR[15:0] register
Set bit 1=1 in TXQCR register to
enable the TXQ memory available
monitor
Wait for interrupt
and check if the bit 6=1
(memory space available)
in ISR register
?
Yes
No
相關PDF資料
PDF描述
KSZ8851-16MLL IC CTLR MAC/PHY NON-PCI 48-LQFP
KSZ8873RLL IC ETHERNET SWITCH 3PORT 64-LQFP
KSZ8851-16MQLI IC CTLR MAC/PHY NON-PCI 128-PQFP
KSZ8851-16MQL IC CTLR MAC/PHY NON-PCI 128-PQFP
LTC4278CDKD#PBF IC PD IEEE 802.3AT 25.5W 32-DFN
相關代理商/技術參數
參數描述
KSZ8851-16MLLI TR 功能描述:以太網 IC 10/100BT Ethernet MAC + PHY with Generic (8, 16-bit) Bus Interface (I-Temp, Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8851-16MLLJ 功能描述:以太網 IC Single-Port Ethernet MAC Controller with 8/16-Bit Non-PCI Interface (125C support) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8851-16MLLJ_10 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:Single-Port Ethernet MAC Controller with 8-Bit or 16-Bit Non-PCI Interface
KSZ8851-16MLLU 功能描述:以太網 IC Single-Port Ethernet Controller (Automotive Grade) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8851-16MLLU TR 功能描述:以太網 IC Single-Port Ethernet Controller (Automotive Grade) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*