參數資料
型號: ISP1160BD/01,151
廠商: ST-ERICSSON
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數: 88/88頁
文件大?。?/td> 394K
代理商: ISP1160BD/01,151
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 05 — 24 December 2004
9 of 88
9397 750 13963
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
8.2 DMA mode
The ISP1160 also provides the DMA mode for external microprocessors to access its
internal FIFO buffer RAM. Data can be transferred by the DMA operation between a
microprocessor’s system memory and the ISP1160’s internal FIFO buffer RAM.
Remark: The DMA operation must be controlled by the external microprocessor
system’s DMA controller (Master).
Figure 4 shows the DMA interface between a microprocessor system and the
ISP1160. The ISP1160 provides a DMA channel controlled by DREQ for DACK_N
signals for the DMA transfer between a microprocessor’s system memory and the
ISP1160 HC’s internal FIFO buffer RAM.
The EOT signal is an external end-of-transfer signal used to terminate the DMA
transfer. Some microprocessors may not have this signal. In this case, the ISP1160
provides an internal EOT signal to terminate the DMA transfer as well. Setting the
HcDMAConguration register (21H to read, A1H to write) enables the ISP1160’s HC
internal DMA counter for the DMA transfer. When the DMA counter reaches the value
set in the HcTransferCounter register (22H to read, A2H to write), an internal EOT
signal will be generated to terminate the DMA transfer.
Fig 3.
Programmed I/O interface between a microprocessor and the ISP1160.
004aaa061
D[15:0]
RD_N
WR_N
CS_N
A1
MICRO-
PROCESSOR
ISP1160
D[15:0]
P bus I/F
RD_N
WR_N
CS_N
A0
IRQ1
INT
Fig 4.
DMA interface between a microprocessor and the ISP1160.
004aaa062
D[15:0]
RD_N
WR_N
DACK1_N
DREQ1
EOT
MICRO-
PROCESSOR
ISP1160
D[15:0]
P bus I/F
RD_N
WR_N
DACK_N
DREQ
EOT
相關PDF資料
PDF描述
ISP1161A1BM,557 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
ISP1183BS,157 UNIVERSAL SERIAL BUS CONTROLLER, PQCC32
相關代理商/技術參數
參數描述
ISP1160BD01FA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BD01-S 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01-T 功能描述:USB 接口集成電路 USB HOST CTRL FULL-SPD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01TM 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BM 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller