參數資料
型號： ISP1160BD/01,151
廠商： ST-ERICSSON
元件分類： 總線控制器
英文描述： UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝： 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數： 11/88頁
文件大小： 394K
代理商： ISP1160BD/01,151
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 05 — 24 December 2004
19 of 88
9397 750 13963
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
5. Prepare PTD data in
P system RAM
The communication between the HCD and the ISP1160 HC is in the form of
Philips Transfer Descriptor (PTD) data. The PTD data provides USB trafc
information about the commands, status and USB data packets.
The physical storage media of PTD data for the HCD is the microprocessor’s
system RAM. For the ISP1160’s HC, the storage media is the internal FIFO buffer
RAM.
The HCD prepares PTD data in the microprocessor’s system RAM for transfer to
the ISP1160’s HC internal FIFO buffer RAM.
6. Transfer PTD data into HC’s FIFO buffer RAM
When PTD data is ready in the microprocessor’s system RAM, the HCD must
transfer the PTD data from the microprocessor’s system RAM into the ISP1160’s
internal FIFO buffer RAM.
7. HC interprets PTD data
The HC determines what USB transactions are required based on the PTD data
that has been transferred into the internal FIFO buffer RAM.
8. HC performs USB transactions via USB bus interface
The HC performs the USB transactions with the specied USB device endpoint
through the USB bus interface.
9. HC informs HCD of the USB trafc results
The USB transaction status and the feedback from the specied USB device
endpoint will be put back into the ISP1160’s HC internal FIFO buffer RAM in PTD
data format. The HCD can read back the PTD data from the internal FIFO buffer
RAM.
9.3 PTD data structure
The Philips Transfer Descriptor (PTD) data structure provides communication
between the HCD and the ISP1160’s USB HC. The PTD data contains information
required by the USB trafc. PTD data consists of a PTD followed by its payload data,
as shown in Figure 16.
Fig 16. PTD data in FIFO buffer RAM.
MGT949
PTD
FIFO buffer RAM
payload data
PTD data #1
PTD
payload data
PTD
PTD data #2
PTD data #N
top
bottom
相關PDF資料
PDF描述
ISP1161A1BM,557 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
ISP1183BS,157 UNIVERSAL SERIAL BUS CONTROLLER, PQCC32
相關代理商/技術參數
參數描述
ISP1160BD01FA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1160BD01-S 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01-T 功能描述:USB 接口集成電路 USB HOST CTRL FULL-SPD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01TM 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1160BM 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*