參數資料
型號: IDT82V2051EPPG8
廠商: IDT, Integrated Device Technology Inc
文件頁數: 20/61頁
文件大小: 0K
描述: IC LIU E1 SGL SHORT HAUL 44-TQFP
標準包裝: 1,250
類型: 線路接口裝置(LIU)
規程: E1
電源電壓: 3.13 V ~ 3.47 V
安裝類型: 表面貼裝
封裝/外殼: 44-LQFP
供應商設備封裝: 44-TQFP(10x10)
包裝: 帶卷 (TR)
其它名稱: 82V2051EPPG8
IDT82V2051E
SINGLE CHANNEL E1 SHORT HAUL LINE INTERFACE UNIT
Functional Description
27
December 9, 2005
3.8
ERROR DETECTION/COUNTING AND INSERTION
3.8.1
DEFINITION OF LINE CODING ERROR
The following line encoding errors can be detected and counted by the
IDT82V2051E:
Received Bipolar Violation (BPV) Error: In AMI coding, when two
consecutive pulses of the same polarity are received, a BPV error
is declared.
HDB3 Code Violation (CV) Error: In HDB3 coding, a CV error is
declared when two consecutive BPV errors are detected, and the
pulses that have the same polarity as the previous pulse are not the
HDB3 zero substitution pulses.
Excess Zero (EXZ) Error: There are two standards defining the
EXZ errors: ANSI and FCC. The EXZ_DEF bit (MAINT6, 13H)
chooses which standard will be adopted by the chip to judge the
EXZ error. Table-11 shows definition of EXZ. In hardware control
mode, only ANSI standard is adopted.
3.8.2
ERROR DETECTION AND COUNTING
Which type of the receiving errors (Received CV/BPV errors, excess
zero errors and PRBS logic errors) will be counted is determined by
ERR_SEL[1:0] bits (MAINT6, 13H). Only one type of receiving error can be
counted at a time except that when the ERR_SEL[1:0] bits are set to ‘11’,
both CV/BPV and EXZ errors will be detected and counted.
Theselectedtypeofreceivingerrorsiscountedinaninternal16-bitError
Counter. Once an error is detected, an error interrupt which is indicated by
corresponding bit in (INTS1, 1AH) will be generated if it is not masked. This
Error Counter can be operated in two modes: Auto Report Mode and Man-
ual Report Mode, as selected by the CNT_MD bit (MAINT6, 13H). In Single
Rail mode, once BPV or CV errors are detected, the CV pin will be driven
to high for one RCLK period.
Auto Report Mode
In Auto Report Mode, the internal counter starts to count the received
errorswhentheCNT_MDbit(MAINT6,13H)issetto‘1’.Aone-secondtimer
is used to set the counting period. The received errors are counted within
one second. If the one-second timer expires, the value in the internal
counter will be transferred to (CNT0, 1BH) and (CNT1, 1CH), then the inter-
nal counter will be reset and start to count received errors for the next sec-
ond. The errors occurred during the transfer will be accumulated to the next
round. The expiration of the one-second timer will set TMOV_IS bit (INTS1,
1AH) to ‘1’, and will generate an interrupt if the TIMER_IM bit (INTM1, 15H)
is set to‘0’.The TMOV_IS bit (INTS1, 1AH) will becleared after the interrupt
register is read. The content in the (CNT0, 1BH) and (CNT1, 1CH) should
be read within the next second. If the counter overflows, a counter overflow
interrupt which is indicated by CNT_OV_IS bit (INTS1, 1AH) will be gener-
ated if it is not masked by CNT_IM bit (INTM1, 15H).
Figure-14 Auto Report Mode
Table-11 EXZ Definition
EXZ Definition
ANSI
FCC
AMI
More than 15 consecutive 0s are detected
More than 80 consecutive 0s are detected
HDB3
More than 3 consecutive 0s are detected
One-Second Timer expired?
counting
Auto Report Mode
(CNT_MD=1)
Bit TMOV_IS is set to '1'
Y
N
CNT0, CNT1
data in counter
counter
0
read the data in CNT0, CNT1 within
the next second
next second
repeats the
same process
Bit TMOV_IS is cleared after
the interrupt register is read
相關PDF資料
PDF描述
IDT72261LA15PFI IC FIFO 8192X18 LP 15NS 64QFP
IDT82V2051EPP8 IC LIU E1 SGL SHORT HAUL 44-TQFP
V24B12M250BF2 CONVERTER MOD DC/DC 12V 250W
MS27472T10F99SA CONN RCPT 7POS WALL MT W/SCKT
VI-JN4-MX-S CONVERTER MOD DC/DC 48V 75W
相關代理商/技術參數
參數描述
IDT82V2052E 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:DUAL CHANNEL E1 SHORT HAUL LINE INTERFACE UNIT
IDT82V2052EPF 功能描述:IC LIU E1 2CH SHORT HAUL 80-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2052EPF8 功能描述:IC LIU E1 2CH SHORT HAUL 80-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2052EPFG 功能描述:IC LIU E1 2CH SHORT HAUL 80-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2052EPFG8 功能描述:IC LIU E1 2CH SHORT HAUL 80-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)