參數資料
型號: ICS1893BFILFT
廠商: IDT, Integrated Device Technology Inc
文件頁數: 113/133頁
文件大?。?/td> 0K
描述: PHYCEIVER LOW PWR 3.3V 48-SSOP
標準包裝: 1,000
系列: PHYceiver™
類型: PHY 收發器
規程: MII
電源電壓: 3.14 V ~ 3.47 V
安裝類型: 表面貼裝
封裝/外殼: 48-BSSOP(0.295",7.50mm 寬)
供應商設備封裝: 48-SSOP
包裝: 帶卷 (TR)
其它名稱: 1893BFILFT
ICS1893BF, Rev. F, 5/13/10
May, 2010
80
Chapter 7 Management Register Set
ICS1893BF Data Sheet - Release
Copyright 2009, IDT, Inc.
All rights reserved.
7.12.1 Data Rate (bit 17.15)
The Data Rate bit indicates the ‘selected technology’. If the ICS1893BF is in:
Hardware mode, the value of this bit is determined by the 10/100SEL input pin.
Software mode, the value of this bit is determined by the Data Rate bit 0.13.
When bit 17.15 is logic:
Zero, it indicates that 10-MHz operations are selected.
One, the ICS1893BF is indicating that 100-MHz operations are selected.
Note: This bit does not imply any link status.
7.12.2 Duplex (bit 17.14)
The Duplex bit indicates the ‘selected technology’. If the ICS1893BF is in:
Hardware mode, the value of this bit is determined by the DPXSEL input pin.
Software mode, the value of this bit is determined by the Duplex Mode bit 0.8.
When bit 17.14 is logic:
Zero, it indicates that half-duplex operations are selected.
One, the ICS1893BF is indicating that full-duplex operations are selected.
Note: This bit does not imply any link status.
7.12.3 Auto-Negotiation Progress Monitor (bits 17.13:11)
The Auto-Negotiation Progress Monitor consists of the Auto-Negotiation Complete bit (bit 17.4) and the
three Auto-Negotiation Monitor bits (bits 17.13:11). The Auto-Negotiation Progress Monitor continually
examines the state of the Auto-Negotiation Process State Machine and reports the status of
Auto-Negotiation using the three Auto-Negotiation Monitor bits. Therefore, the value of these three bits
provides the status of the Auto-Negotiation Process.
These three bits are initialized to logic zero in one of the following ways:
If Auto-Negotiation is enabled, these bits continually latch the highest state that the Auto-Negotiation State
Machine achieves. That is, they are updated only if the binary value of the next state is greater than the
binary value of the present state as outlined in Table 7-19.
相關PDF資料
PDF描述
IDT72V261LA15PF IC FIFO SS 8192X18 15NS 64QFP
IDT72V255LA15PF IC FIFO SS 8192X18 15NS 64-TQFP
MS27499E8B6PA CONN RCPT 6POS BOX MNT W/PINS
ICS1893BKLF PHYCEIVER LOW PWR 3.3V 56-VQFN
VE-26V-IX-B1 CONVERTER MOD DC/DC 5.8V 75W
相關代理商/技術參數
參數描述
ICS1893BFIT 功能描述:PHYCEIVER LOW PWR 3.3V 48-SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:PHYceiver™ 標準包裝:1,000 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.295",7.50mm 寬) 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
ICS1893BFLF 功能描述:PHYCEIVER LOW PWR 3.3V 48-SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:PHYceiver™ 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
ICS1893BFLFT 功能描述:PHYCEIVER LOW PWR 3.3V 48-SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:PHYceiver™ 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
ICS1893BFT 功能描述:PHYCEIVER LOW PWR 3.3V 48-SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:PHYceiver™ 標準包裝:1,000 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.295",7.50mm 寬) 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
ICS1893BK 功能描述:PHYCEIVER LOW PWR 3.3V 56-VQFN RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:PHYceiver™ 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)