
Datasheet
DD2.x
PowerPC 750CL Microprocessor
Preliminary
General Information
750cl_ds_body.fm.2.4
May 29, 2007
1.2 Processor Version Register
The 750CL has the following Processor Version Register (PVR) values for the respective design revision
levels.
1.3 Part Number Information
Table 1-1. 750CL Processor Version Register (PVR)
750CL Design Revision Level
PVR
DD2.0
0x00087210
IBMPPC750CLGEQ8023
PowerPC 750 Family Member
Process Technology
Application Conditions
Reliability Grade
Nominal Core Frequency and
Package Type
Design Revision Level
Process Technology
G = 10KE
Design Revision Level
E = DD2.0
Package Type
Q = Lead-free flip chip plastic ball grid array (FCPBGA)
Nominal Core Frequency
and Recommended
Operating VDD Range
Part
Max. Core
Recommended
Designator
Frequency
VDD Range
A0
1 GHz
1.20 V to 1.30 V
90
900 MHz
1.15 V to 1.25 V
80
800 MHz
1.10 V to 1.20 V
73
733 MHz
1.10 V to 1.20 V
60
600 MHz
1.00 V to 1.10 V
50
500 MHz
0.95 V to 1.05 V
40
400 MHz
0.90 V to 1.00 V
Application Conditions
TJ = 0°C to 105°C
Reliability Grade
3 = Grade 3; less than 100 failures in time (FIT) average failute rate (AFR). See note 3.
Notes:
1. The TJ range, nominal core frequency, and VDD range specified by the part number become part of the recom-
2. The lower voltage shown in the recommended VDD range is the minimum VDD at which the part will operate while
at the maximum TJ and maximum core frequency. If VDD decreases below the minimum value, some parts will not
operate correctly at maximum TJ and maximum core frequency.
3. Some early DD2.0 part numbers (IBMPPC750CLGEQ4024, IBMPPC750CLGEQ5024,
IBMPPC750CLGEQ6024, IBMPPC750CLGEQ7324, IBMPPC750CLGEQ8024, IBMPPC750CLGEQ9024,
IBMPPC750CLGEQA024) contained a “4” for the reliability grade. Subsequent reliability testing showed that
these parts qualified as reliability grade 3. The part numbers were then changed to show the actual reliability
grade. All of the IBMPPC750CLGEQxxx4 parts are grade 3 reliability.
Recommended Operating
VDD Range