參數資料
型號： HN29W12811T-60
廠商： Hitachi,Ltd.
英文描述： 128M AND type Flash Memory More than 8,029-sector (135,657,984-bit)
中文描述： 128M的超過8029型快閃記憶體部門（135657984位）
文件頁數： 10/42頁
文件大?。?/td> 315K
代理商： HN29W12811T-60
HN29W12811 Series
10
Mode Description
Read
Serial Read (1):
Memory data D0 to D2111 in the sector of address SA is sequentially read.
Output data is
not valid after the number of the SC pulse exceeds 2112. When CA is input, memory data D (m) to D (m + j)
in the sector of address SA is sequentially read. Then output data is not valid after the number of the SC pulse
exceeds (2112 to m). The mode turns back to the standby mode at any time when
CE
is V
IH
.
Serial Read (2):
Memory data D2048 to D2111 in the sector of address SA is sequentially read. Output data
is not valid after the number of the SC pulse exceeds 64. The mode turns back to the standby mode at any
time when
CE
is V
IH
.
Automatic Erase
Single Sector Erase:
Memory data D0 to D2111 in the sector of address SA is erased automatically by
internal control circuits. After the sector erase starts, the erasure completion can be checked through the
RDY/
Busy
signal and status data polling. All the bits in the sector are "1" after the erase. The sector valid
data stored in a part of memory data D2048 to D2111 must be read and kept outside of the sector before the
sector erase.
Automatic Program
Program (1):
Program data PD0 to PD2111 is programmed into the sector of address SA automatically by
internal control circuits. When CA is input, program data PD (m) to PD (m + j) is programmed from CA into
the sector of address SA automatically by internal control circuits. By using program (1), data can
additionally be programed for each sector before the following erase. When the column is programmed, the
data of the column must be [FF]. After the programming starts, the program completion can be checked
through the RDY/
Busy
signal and status data polling. Programmed bits in the sector turn from "1" to "0"
when they are programmed. The sector valid data should be included in the program data PD2048 to PD2111.
Program (2):
Program data PD0 to PD2111 is programmed into the sector of address SA automatically by
internal control circuits. After the programming starts, the program completion can be checked through the
RDY/
Busy
signal and status data polling. Programmed bits in the sector turn from "1" to "0" when they are
programmed. The sector must be erased before programming. The sector valid data should be included in the
program data PD2048 to PD2111.
Program (3):
Program data PD2048 to PD2111 is programmed into the sector of address SA automatically
by internal control circuits. By using program (3), data can additionally be programed for each sector befor
the following erase. When the column is programmed, the data of the column must be [FF]. After the
programming starts, the program completion can be checked through the RDY/
Busy
signal and status data
polling. Programmed bits in the sector turn from "1" to "0" when they are programmed.
相關PDF資料
PDF描述
HN29W12811 128M AND type Flash Memory More than 8,029-sector (135,657,984-bit)
HN29W12814A 128M AND type Flash Memory(128M AND型閃速存儲器)
HN29W25611T-50 256M AND type Flash Memory More than 16,057-sector (271,299,072-bit)
HN29W25611T 256M AND type Flash Memory More than 16,057-sector (271,299,072-bit)
HN29W25611T-50H 256M AND type Flash Memory More than 16,057-sector (271,299,072-bit)
相關代理商/技術參數
參數描述
HN29W12814ASERIES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AND Flash EEPROM
HN29W12814ATT-50 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EEPROM|AND FLASH|2X8448KX8|CMOS|TSOP|48PIN|PLASTIC
HN29W16814SERIES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AND Flash EEPROM
HN29W25611 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:256M AND type Flash Memory More than 16,057-sector (271,299,072-bit)
HN29W25611SERIES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AND Flash EEPROM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*