參數資料
型號: HMC610LP4
廠商: HITTITE MICROWAVE CORP
元件分類: 檢測器
英文描述: 0 MHz - 3900 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX
封裝: 4 X 4 MM, LEADLESS, PLASTIC, SMT, QFN-24
文件頁數: 9/22頁
文件大?。?/td> 786K
代理商: HMC610LP4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
P
O
W
E
R
D
E
T
E
C
T
O
R
S
-
SM
T
12
12 - 42
RF Input Interface
The IN+ and IN- pins are differential RF inputs, which can be externally configured as differential or single-ended
input. Power match components are placed at these input terminals, along with DC blocking capacitors. The
coupling capacitor values also set the lower spectral boundary of the input signal bandwidth. The inputs can be
reactively matched (refer to input return loss graphs), but a resistor network should be sufficient for good wideband
performance.
Selecting resistor values for Differential Interface:
The value of R25 depends on the balun used; if the balun is
50Ω on both sides of the SE-Diff conversion,
then R25
, Ω , where
RM = the
desired power match impedance in
ohms
For RM = 50 Ω, R25 = 64.7 Ω ≈ 68 Ω
Single-Ended Input Interface
Tuned SE-interface: for signal frequencies > 900MHz
Choose L and C elements from the following graph for
narrowband tuning of the SE-interface: R5 = 27Ω, R1 = 82Ω,
C2 = 100 pF, R2 = 0Ω, L1, C3 - see graph.
Wideband SE-interface: for signal frequencies < 900MHz
R5 = 27Ω, R1 = 82Ω,
C2, C3 are 1nF decoupling caps.
R2 is 0Ω, and R25 is open
For wideband (un-tuned) input interfaces, choose the input decoupling capacitor values by first determining the lowest
spectral component the power detector is required to sense, L.
Input decoupling capacitor value
, Farads, where L is in Hertz.
Ex. If the power detector needs to sense down to 10MHz, the decoupling capacitor value should be
1/(π*10E6*3.2) = 10nF
A DC bias (Vcc-0.7V) is present on the IN+ and IN- pins, and should not be overridden.
HMC610LP4 / 610LP4E
v12.0309
RMS POWER DETECTOR
75 dB, DC - 3.9 GHz
R25 on
Eval Board
0
2
4
6
8
10
0
1
2
3
4
5
0.9
1.4
1.9
2.4
2.9
3.4
3.9
TUNI
NG
I
N
DUCTACE,
L1
(nH)
TUNING
CAPACITANCE,
C3,
(pF)
CENTER FREQUENCY, Fc, (GHz)
Tuning SE Input Interface: C ±300 MHz
RD
2
.
3
1
L
f
p
相關PDF資料
PDF描述
HMC611 1 MHz - 10000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 15 dBm INPUT POWER-MAX
HMC618LP3E 1200 MHz - 2200 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER
HMC618LP3 1200 MHz - 2200 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER
HMC628LP4E 50 MHz - 800 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
HMC628LP4 50 MHz - 800 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
相關代理商/技術參數
參數描述
HMC610LP4E 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:70 dB RMS POWER DETECTOR, DC - 3.9 GHz
HMC611 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz
HMC611_10 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz
HMC611LP4 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz
HMC611LP4_09 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz