4
FN3612.10
June 27, 2006
Absolute Maximum Ratings
Thermal Information
Supply Voltage
AVDD to AGND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5.5V
AVSS to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -5.5V
DVDD to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5.5V
DGND to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
±0.3V
Analog Input Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . AVSS to AVDD
Digital Input, Output and I/O Pins . . . . . . . . . . . . . . DGND to DVDD
ESD Tolerance (No Damage)
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100V
Charged Device Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . -40° C to 85°C
Thermal Resistance (Typical, Note 1)
θ
JA (°C/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
Maximum Junction Temperature
Plastic Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering, 10s). . . . . . . . . . . . . 300°C
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1.
θ
JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications
AVDD = +5V, AVSS = -5V, DVDD = +5V, VRHI = +2.5V, VRLO = AGND = 0V, VCM = AGND,
PGIA Gain = 1, OSCIN = 10MHz, Bipolar Input Range Selected, fN = 10Hz
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNITS
SYSTEM PERFORMANCE
Integral Non-Linearity, INL
End Point Line Method (Notes 3, 5, 6)
-
±0.0007
±0.0015
%FS
Differential Non-Linearity
(Note 2)
No Missing codes to 22-Bits
LSB
Offset Error, VOS
-
Offset Error Drift
VINHI = VINLO (Notes 3, 8)
-
1
-
μV/°C
Full Scale Error, FSE
VINHI - VINLO = +2.5V (Notes 3, 5, 8, 10)
-
Noise, eN
-
Common Mode Rejection Ratio, CMRR
VCM = 0V, VINHI = VINLO from -2V to +2V
-
70
-
dB
Normal Mode 50Hz Rejection
Filter Notch = 10Hz, 25Hz, 50Hz (Note 2)
120
-
dB
Normal Mode 60Hz Rejection
Filter Notch = 10Hz, 30Hz, 60Hz (Note 2)
120
-
dB
Step Response Settling Time
-
2
4
Conversions
ANALOG INPUTS
Input Voltage Range
Unipolar Mode (Note 9)
0
-
VREF
V
Input Voltage Range
Bipolar Mode (Note 9)
- VREF
-VREF
V
Common Mode Input Range
(Note 2)
AVSS
-AVDD
V
Input Leakage Current, IIN
VIN = AVDD (Note 2)
-
1.0
nA
Input Capacitance, CIN
-5.0
-
pF
Reference Voltage Range, VREF
(VREF = VRHI - VRLO)
2.5
-
5
V
Transducer Burn-Out Current, IBO
-
200
-
nA
CALIBRATION LIMITS
Positive Full Scale Calibration Limit
-
1.2(VREF/Gain)
-
Negative Full Scale Calibration Limit
-
1.2(VREF/Gain)
-
Offset Calibration Limit
-
1.2(VREF/Gain)
-
Input Span
0.2(VREF/Gain)
-
2.4(VREF/Gain)
-
DIGITAL INPUTS
Input Logic High Voltage, VIH
(Note 11)
2.0
-
V
Input Logic Low Voltage, VIL
--
0.8
V
Input Logic Current, II
VIN = 0V, +5V
-
1.0
10
μA
HI7190