參數資料
型號： EPC8
廠商： Altera Corporation
英文描述： Configuration Devices for SRAM-Based LUT Devices
中文描述： 配置SRAM器件基于LUT的器件
文件頁數： 24/36頁
文件大?。?/td> 283K
代理商： EPC8
24
Altera Corporation
Configuration Devices for SRAM-based LUT Devices Data Sheet
3.3-V or 5.0-V Operation
EPC2, EPC1, and EPC1441 devices can configure 5.0-V, 3.3-V, or 2.5-V
devices. For each configuration device, an option must be set for 5.0-V or
3.3-V operation (EPC4, EPC8, and EPC16 devices are 3.3 V). For EPC1 and
EPC1441 configuration devices, the
Use Low-Voltage Configuration EPROM
option in the
Global Project Device Options
dialog box (Assign menu) in
the MAX+PLUS II software sets this parameter. (For APEX 20K, APEX II,
and Mercury devices, the Quartus II software provides a similar option.)
For EPC2 devices, this option is set externally by the
VCCSEL
pin. In
addition, the EPC2 device has an externally controlled option, set by the
VPPSEL
pin, to adjust the programming voltage to 5.0 V or 3.3 V.
The functions of the
VCCSEL
and
VPPSEL
pins are described below.
■
VCCSEL
pin—For EPC2 configuration devices, 5.0-V or 3.3-V
operation is controlled by the
VCCSEL
option pin. The device
functions in 5.0-V mode when
VCCSEL
is connected to
GND
; the
device functions in 3.3-V mode when
VCCSEL
is connected to V
CC
.
■
VPPSEL
pin—The EPC2
VPP
programming power pin is normally
tied to V
CC
. For EPC2 devices operating with a 3.3-V supply, it is
possible to improve EPC2 in-system programming times by
providing
VPP
with a 5.0-V supply. For all other devices,
VPP
must be
tied to V
CC
. The EPC2 device’s
VPPSEL
pin must be set in accordance
with the EPC2
VPP
pin. If the
VPP
pin is supplied by a 5.0-V supply,
VPPSEL
must be connected to
GND
; if the
VPP
pin is supplied by a
3.3-V power supply,
VPPSEL
must be connected to V
CC
.
Table 8
describes the relationship between the V
CC
and V
PP
voltage levels
and the required logic level for
VCCSEL
and
VPPSEL
(i.e., high or low
logic level).
Table 8. VCCSEL & VPPSEL Pin Functions on the EPC2
V
CC
Voltage Level
(V)
V
PP
Voltage Level
(V)
VCCSEL Pin Logic
Level
VPPSEL Pin Logic
Level
3.3
3.3
5.0
3.3
5.0
5.0
High
High
Low
High
Low
Low
相關PDF資料
PDF描述
EPC1 433800612
EPC1 Configuration Devices for SRAM-Based LUT Devices
EPC1064 Configuration Devices for SRAM-Based LUT Devices
EPC1064V Configuration Devices for SRAM-Based LUT Devices
EPC1213 Configuration Devices for SRAM-Based LUT Devices
相關代理商/技術參數
參數描述
EPC-8 制造商:Curtis Industries 功能描述:
EPC8002 功能描述:TRANS GAN 65V 2.7A BUMPED DIE 制造商:epc 系列:eGaN? 包裝:剪切帶（CT） 零件狀態:有效 FET 類型:GaNFET N 通道，氮化鎵 FET 功能:標準 漏源極電壓（Vdss）:65V 電流 - 連續漏極（Id）（25°C 時）:2A（Ta） 不同?Id，Vgs 時的?Rds On（最大值）:530 毫歐 @ 500mA，5V 不同 Id 時的 Vgs（th）（最大值）:2.5V @ 250μA 不同 Vgs 時的柵極電荷（Qg）:- 不同 Vds 時的輸入電容（Ciss）:21pF @ 32.5V 功率 - 最大值:- 工作溫度:-40°C ~ 150°C（TJ） 安裝類型:表面貼裝 封裝/外殼:模具 供應商器件封裝:模具 標準包裝:1
EPC8002ENGR 制造商:Efficient Power Conversion 功能描述:TRANS GAN 65V 2A BUMPED DIE
EPC8002TENGR 制造商:Efficient Power Conversion 功能描述:TRANS GAN 65V 2A BUMPED DIE
EPC8003ENGR 制造商:Efficient Power Conversion 功能描述:TRAN GAN 100V 2.5A BUMPED DIE
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*