- 您現在的位置：買賣IC網 > PDF目錄376563 > DAC8248FW (PRECISION MONOLITHICS INC) Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter PDF資料下載
參數資料
| 型號： | DAC8248FW |
| 廠商： | PRECISION MONOLITHICS INC |
| 元件分類： | DAC |
| 英文描述： | Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter |
| 中文描述： | 12-BIT DAC, CDIP24 |
| 文件頁數： | 14/16頁 |
| 文件大?。?/td> | 350K |
| 代理商： | DAC8248FW |
DAC8248
–14–
REV. B
ground as shown in Figure 9. T he output voltage will be be-
tween +5 V and +10 V depending on the digital input code.
T he output expression is given by:
V
OUT
= V
OS
×
(D/
4096
)(V
OS
)
where
V
OS
= Offset Reference Voltage (+5 V in Figure 9)
D
= Decimal Equivalent of the Digital Input Word
VOLT AGE SWIT CHING MODE
Figure 10 shows the DAC8248 in another single supply configu-
ration. T he R-2R ladder is used in the voltage switching mode
and functions as a voltage divider. T he output voltage (at the
V
REF
pin) exhibits a constant impedance R (typically 11 k
) and
must be buffered by an op amp. T he R
FB
pins are not used and
are left open. T he reference input voltage must be maintained
within +1.25 V of AGND, and V
DD
between +12 V and +15 V;
this ensures that device accuracy is preserved.
T he output voltage expression is given by:
V
OUT
= V
REF
(D/
4096
)
where
D
= Decimal Equivalent of the Digital Input Word
APPLICAT IONS T IPS
GE NE RAL GROUND MANAGE ME NT
Grounding techniques should be tailored to each individual sys-
tem. Ground loops should be avoided, and ground current paths
should be as short as possible and have a low impedance.
T he DAC8248’s AGND and DGND pins should be tied to-
gether at the device socket to prevent digital transients from ap-
pearing at the analog output. T his common point then becomes
the single ground point connection. AGND and DGND is then
brought out separately and tied to their respective power supply
grounds. Ground loops can be created if both grounds are tied
together at more than one location, i.e., tied together at the de-
vice and at the digital and analog power supplies.
PC board ground plane can be used for the single point ground
connection should the connections not be practical at the device
socket. If neither of these connections are practical or allowed,
then the device should be placed as close as possible to the sys-
tems single point ground connection. Back-to-back Schottky di-
odes should then be connected between AGND and DGND.
POWE R SUPPLY DE COUPLING
Power supplies used with the DAC8248 should be well filtered
and regulated. Local supply decoupling consisting of a 1
μ
F to
10
μ
F tantalum capacitor in parallel with a 0.1
μ
F ceramic is
highly recommended. T he capacitors should be connected be-
tween the V
DD
and DGND pins and at the device socket.
Figure 9. Single Supply Operation (Current Switching Mode)
相關PDF資料 |
PDF描述 |
|---|---|
| DAC8248HP | Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter |
| DAC8248HS | Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter |
| DAC8400 | Octal 8-Bit Cmos D/A Converter(八路8位D/A轉換器) |
| DAC8408AT | Quad 8-Bit Multiplying CMOS D/A Converter with Memory |
| DAC8408BT | Quad 8-Bit Multiplying CMOS D/A Converter with Memory |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DAC8248GBC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:12-Bit Digital-to-Analog Converter |
| DAC8248GP | 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter |
| DAC8248GPZ | 功能描述:IC DAC 12BIT DUAL W/BUFF 24DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| DAC8248HP | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| DAC8248HS | 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter |
發布緊急采購，3分鐘左右您將得到回復。