參數資料
型號: CXD2585Q
廠商: Sony Corporation
元件分類: 數字信號處理
英文描述: CD Digital Signal Processor with Built-in Digital Servo
中文描述: CD數字信號處理器的內置數碼舵機
文件頁數: 88/127頁
文件大小: 962K
代理商: CXD2585Q
– 88 –
CXD2585Q
§ 5-6. AGCNTL (Automatic Gain Control) Function
The AGCNTL function automatically adjusts the filter internal gain in order to obtain the appropriate servo loop
gain. AGCNTL not only copes with the sensitivity variation of the actuator and photo diode, etc., but also
obtains the optimal gain for each disc.
The AGCNTL command is sent when each servo is turned on. During AGCNTL operation, if the upper 8 bits of
the command register are 38 (Hex), the completion of AGCNTL operation can be confirmed by monitoring the
SENS pin. (See Timing Chart 5-4 and "Description of SENS Signals".)
Setting D9 and D8 of $38 to 1 set FCS (focus) and TRK (tracking) respectively to AGCNTL operation.
Note)
During AGCNTL operation, each servo filter gain must be normal, and the anti-shock circuit (described
hereafter) must be disabled.
Timing Chart 5-4.
Coefficient K13 changes for AGF (focus AGCNTL) and coefficients K23 and K07 change for AGT (tracking
AGCNTL) due to AGCNTL.
These coefficients change from 01 to 7F (Hex), and they must also be set within this range when written
externally.
After AGCNTL operation has completed, these coefficient values can be confirmed by reading them out from
the SENS pin with the serial readout function (described hereafter).
AGCNTL related settings
The following settings can be changed with $35, $36 and $37.
FG6 to FG0; AGF convergence gain setting, effective setting range: 00 to 57 (Hex)
TG6 to TG0; AGT convergence gain setting, effective setting range: 00 to 57 (Hex)
AGS;
Self-stop on/off
AGJ;
Convergence completion judgment time
AGGF;
Internally generated sine wave amplitude (AGF)
AGGT;
Internally generated sine wave amplitude (AGT)
AGV1;
AGCNTL sensitivity 1 (during rough adjustment)
AGV2;
AGCNTL sensitivity 2 (during fine adjustment)
AGHS;
Rough adjustment on/off
AGHT;
Fine adjustment time
Note)
Converging servo loop gain values can be changed with the FG6 to FG0 and TG6 to TG0 setting values. In
addition, these setting values must be within the effective setting range. The default settings aim for 0dB at
1kHz. However, since convergence values vary according to the characteristics of each constituent
element of the servo loop, FG and TG values should be set as necessary.
XLAT
SENS
( = AGOK)
Max. 11.4μs
AGCNTL completion
相關PDF資料
PDF描述
CXD2586R CD Digital Signal Processor With Built-In Digital Servo and DAC(CD數字信號處理器(內置數字伺服系統和D/A轉換器))
CXD2586R-1 CD Digital Signal Processor with Built-in Digital Servo and DAC
CXD2587 RESISTOR,MIL-PRF-39007/9
CXD2587Q CD Digital Signal Processor with Built-in Digital Servo and DAC
CXD2588Q RESISTOR,MIL-PRF-39007/9
相關代理商/技術參數
參數描述
CXD2586R 制造商:SONY 制造商全稱:Sony Corporation 功能描述:CD Digital Signal Processor with Built-in Digital Servo and DAC
CXD2586R/-1 制造商:未知廠家 制造商全稱:未知廠家 功能描述:CD-Player Processor/Controller
CXD2586R-1 制造商:SONY 制造商全稱:Sony Corporation 功能描述:CD Digital Signal Processor with Built-in Digital Servo and DAC
CXD2587 制造商:SONY 制造商全稱:Sony Corporation 功能描述:CD Digital Signal Processor with Built-in Digital Servo and DAC
CXD2587Q 制造商:SONY 制造商全稱:Sony Corporation 功能描述:CD Digital Signal Processor with Built-in Digital Servo and DAC