參數資料
型號： CS4360-DZZR
廠商： Cirrus Logic Inc
文件頁數： 20/37頁
文件大小： 0K
描述： IC DAC STER 6CH 102DB 28-TSSOP
標準包裝： 4,000
位數： 24
數據接口： 串行
轉換器數目： 6
電壓電源： 模擬和數字
功率耗散（最大）： 265mW
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 28-TSSOP（0.173"，4.40mm 寬）
供應商設備封裝： 28-TSSOP
包裝： 帶卷 (TR)
輸出數目和類型： 6 電壓，單極
采樣率（每秒）： 192k
CS4360
DS517F2
27
4.9.2b
IC Read
To read from the device, follow the procedure below while adhering to the control port Switching Specifi-
cations. During this operation it is first necessary to write to the device, specifying the appropriate register
through the MAP.
1) After writing to the MAP (see section 4.9.1), initiate a repeated START condition to the IC bus fol-
lowed by the address byte. The upper 6 bits must be 001000. The seventh bit must match the setting
of the AD0 pin, and the eighth must be 1. The eighth bit of the address byte is the R/W bit.
2) Signal the end of the address byte by not issuing an acknowledge. The device will then transmit the
contents of the register pointed to by the MAP. The MAP will contain the address of the last register
written to the MAP.
3) If the INCR bit is set to 1, the device will continue to transmit the contents of successive registers. Con-
tinue providing a clock but do not issue an ACK on the bytes clocked out of the device. After all the
desired registers are read, initiate a STOP condition to the bus.
4) If the INCR bit is set to 0 and further IC reads from other registers are desired, it is necessary to repeat
the procedure detailed from step 1. If no further reads from other registers are desired, initiate a STOP
condition to the bus.
4.9.3
SPI Mode
In SPI mode, data is clocked into the serial control data line, CDIN, by the serial control port clock, CCLK
(see Figure 21 for the clock to data relationship). There is no AD0 pin. Pin CS is the chip select signal and
is used to control SPI writes to the control port. When the device detects a high-to-low transition on the
AD0/CS pin after power-up, SPI mode will be selected. All signals are inputs and data is clocked in on the
rising edge of CCLK.
SD A
SC L
001000
A D 0
W
Sta rt
AC K
MA P
1-8
AC K
DA TA
1-8
AC K
Stop
Figure 19. IC Write
SD A
SC L
00 10 00
A D 0
W
Sta rt
AC K
MA P
1- 8
AC K
00 10 00
A D 0
R
R e p e a te d ST AR T
or
A b o rte d W R IT E
AC K
Da ta 1 -8
(poi nted to by M A P )
D a ta 1 -8
(p oi nted to by M A P )
AC K
Sto p
Figure 20. IC Read
相關PDF資料
PDF描述
V150A12H500B2 CONVERTER MOD DC/DC 12V 500W
LTC1660CGN IC D/A CONV 10BIT OCTAL 16-SSOP
LTC1450LCG IC D/A CONV 12BIT R-R PAR 24SSOP
V375A36H500BG3 CONVERTER MOD DC/DC 36V 500W
LTC2607CDE#TRPBF IC DAC 16BIT R-R I2C 12-DFN
相關代理商/技術參數
參數描述
CS4360-KS 制造商:Rochester Electronics LLC 功能描述:- Bulk
CS4360-KZ 制造商:Rochester Electronics LLC 功能描述: 制造商:Cirrus Logic 功能描述:Digital Analog Converter, Hex, 24 Bit, 28 Pin, TSSOP
CS4360-KZZ 功能描述:數模轉換器- DAC IC 102dB 24Bit 192kHz 6 ch DAC RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube
CS4360-KZZR 功能描述:數模轉換器- DAC IC 102dB 24Bit 192kHz 6ch DAC RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube
CS4361 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:20-Pin, 24-Bit, 192 kHz, 6-Channel D/A Converter
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*