- 您現在的位置：買賣IC網 > PDF目錄97842 > ADRF6704ACPZ (ANALOG DEVICES INC) 2500 MHz - 2900 MHz RF/MICROWAVE I/Q MODULATOR PDF資料下載
參數資料
| 型號： | ADRF6704ACPZ |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 調制器/解調器 |
| 英文描述： | 2500 MHz - 2900 MHz RF/MICROWAVE I/Q MODULATOR |
| 封裝： | 6 X 6 MM, ROHS COMPLIANT, MO-220VJJD-2, LFCSP_VQ, CP-40-1, 40 PIN |
| 文件頁數： | 2/18頁 |
| 文件大?。?/td> | 581K |
| 代理商： | ADRF6704ACPZ |
ADRF6704
Preliminary Technical Data
DEVICE PROGRAMMING
Device programming is effected using a three pin SPI port. The
description of timing requirements for the SPI port is given in
Figure 2. There are eight programmable registers, each with 24
bits, controlling the operation of the device. The register
functions can be broken down as follows;
Register 0 – Integer control for the PLL.
Register 1 – Modulus control for PLL.
Register 2 – Fractional control for PLL.
Register 3 – Sigma Delta Function
Register 4 – PLL Charge pump, PFD, reference path control
Register 5 – LO path and modulator control
Register 6 – VCO controls and VCO enable functions
Register 7 – Modulator bias enable, external VCO enable
Note - The PLL has internal calibration that must be run when
the device is programmed with a given frequency. This
calibration is automatically run whenever registers 0, 1, or 2 are
programmed. Because the other registers affect PLL
performance, the lower three registers should always be
programmed last, preferably in the order 0, 1, 2.
Software is available on the Analog Devices website
(www.analog.com) that allows easy programming from a PC
running Windows XP
.
REGISTER 0 INTEGER DIVIDE CONTROL
With R0[2:0] set to 000, the on-chip integer divide control
register is programmed as shown in figure 39.
INTEGER DIVIDE RATIO
The integer divide ratio is used to set the INT value in Equation 1.
The INT, FRAC, and MOD values make it possible to generate
output frequencies that are spaced by fractions of the PFD
frequency. The VCO frequency (FVCO) equation is:
FVCO = 2 × fPFD × (INT + (FRAC/MOD))
(1)
Where:
FVCO is the output frequency of the internal VCO.
INT is the preset integer divide ratio value (24 to 119 in
fractional mode).
MOD is the preset fractional modulus (1 to 2047).
FRAC is the preset fractional divider ratio value (0 to MOD-1).
DIVIDE MODE
Divide mode determines whether fractional mode or integer
mode is used. In integer mode, the RF VCO output frequency
(FVCO) is calculated using the following equation:
FVCO = 2 × fPFD × (INT)
(2)
where INT is the integer divide ratio value (21 to 123 in integer
mode).
Rev. PrE | Page 10 of 18
相關PDF資料 |
PDF描述 |
|---|---|
| AFEM-7780-BLK | 1920 MHz - 1980 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AGB3301RS24Q1 | 250 MHz - 3000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| AGB3301S2401 | 250 MHz - 3000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| ALM-1712-BLKG | RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ALM-1712-TR1G | RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADRF6704ACPZ-R7 | 功能描述:IC MOD QUAD FRAC N PLL 40LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 調制器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:調制器 LO 頻率:700MHz ~ 2.3GHz RF 頻率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 輸出功率:-1dBm 電流 - 電源:46mA 電源電壓:2.7 V ~ 3.6 V 測試頻率:1.75GHz 封裝/外殼:28-WFQFN 裸露焊盤 包裝:帶卷 (TR) |
| ADRF6704-EVALZ | 制造商:Analog Devices 功能描述:EVAL QUAD MODULATOR ADRF6704 制造商:Analog Devices 功能描述:ADRF6704, QUAD MODULATOR, EVAL BOARD |
| ADRF6720-27ACPZ-R7 | 功能描述:RF Modulator IC 400MHz ~ 3GHz 40-WFQFN Exposed Pad, CSP 制造商:analog devices inc. 系列:- 包裝:剪切帶（CT） 零件狀態:有效 功能:調制器 LO 頻率:356MHz ~ 2.855GHz RF 頻率:400MHz ~ 3GHz P1dB:11dBm 本底噪聲:-162dBm/Hz 輸出功率:5dBm 電流 - 電源:425mA 電壓 - 電源:3.3V 測試頻率:2.14GHz 封裝/外殼:40-WFQFN 裸露焊盤，CSP 標準包裝:1 |
| ADRF6720-27-EVALZ | 功能描述:EVAL BOARD FOR ADRF6720-27 制造商:analog devices inc. 系列:- 零件狀態:有效 類型:調制器 頻率:400MHz ~ 3GHz 配套使用產品/相關產品:ADRF6720-27 所含物品:板 標準包裝:1 |
| ADRF6720ACPZ-R7 | 功能描述:WIDEBAND INTEG MOD WITH PLL AND 制造商:analog devices inc. 系列:- 包裝:剪切帶（CT） 零件狀態:在售 功能:調制器 LO 頻率:356MHz ~ 2.855GHz P1dB:12.2dBm 本底噪聲:-158dBm/Hz 輸出功率:5dBm 電流 - 電源:425mA 電壓 - 電源:3.3V 測試頻率:2GHz 封裝/外殼:40-WFQFN 裸露焊盤 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。