- 您現在的位置：買賣IC網 > PDF目錄9508 > AD7606BSTZ-4RL (Analog Devices Inc)IC DAS W/ADC 16BIT 64LQFP PDF資料下載
參數資料
| 型號： | AD7606BSTZ-4RL |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 16/36頁 |
| 文件大小： | 0K |
| 描述： | IC DAS W/ADC 16BIT 64LQFP |
| 設計資源： | Layout Considerations for an Expandable Multichannel Simultaneous Sampling Data Acquisition System Based on AD7606 (CN0148) |
| 標準包裝： | 1 |
| 類型： | 數據采集系統（DAS），ADC |
| 分辨率（位）： | 16 b |
| 采樣率（每秒）： | 200k |
| 數據接口： | DSP，MICROWIRE?，并聯，QSPI?，串行，SPI? |
| 電壓電源： | 模擬和數字 |
| 電源電壓： | 2.3 V ~ 5.25 V，4.75 V ~ 5.25 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 64-LQFP |
| 供應商設備封裝： | 64-LQFP（10x10） |
| 包裝： | 標準包裝 |
| 其它名稱： | AD7606BSTZ-4RLDKR |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁當前第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁
Data Sheet
AD7606/AD7606-6/AD7606-4
Rev. C | Page 23 of 36
1M
CLAMP
Vx
1M
CLAMP
VxGND
RFB
C
R
ANALOG
INPUT
SIGNAL
AD7606
0
847
9-
0
34
Figure 36. Input Resistance Matching on the Analog Input of the
AD7606/AD7606-6/AD7606-4
Analog Input Antialiasing Filter
An analog antialiasing filter (a second-order Butterworth) is also
provided on the AD7606/AD7606-6/AD7606-4. Figure 37 and
Figure 38 show the frequency and phase response, respectively,
of the analog antialiasing filter. In the ±5 V range, the 3 dB
frequency is typically 15 kHz. In the ±10 V range, the 3 dB
frequency is typically 23 kHz.
5
0
–5
–10
–15
–20
–25
–30
–35
–40
100
1k
10k
100k
AT
T
E
N
UAT
IO
N
(
d
B
)
INPUT FREQUENCY (Hz)
08
47
9-
0
35
±10V RANGE
±5V RANGE
AVCC, VDRIVE = 5V
FSAMPLE = 200kSPS
TA = 25°C
±10V RANGE
0.1dB
3dB
–40
10,303
24,365Hz
+25
9619
23,389Hz
+85
9326
22,607Hz
±5V RANGE
0.1dB
3dB
–40
5225
16,162Hz
+25
5225
15,478Hz
+85
4932
14,990Hz
Figure 37. Analog Antialiasing Filter Frequency Response
18
16
14
12
10
8
6
4
2
0
–2
–4
–6
10
100k
10k
1k
–8
P
HAS
E
D
E
L
A
Y
(
s)
INPUT FREQUENCY (Hz)
08
47
9-
0
36
AVCC, VDRIVE = 5V
FSAMPLE = 200kSPS
TA = 25°C
±5V RANGE
±10V RANGE
Figure 38. Analog Antialias Filter Phase Response
Track-and-Hold Amplifiers
The track-and-hold amplifiers on the AD7606/AD7606-6/
AD7606-4 allow the ADC to accurately acquire an input sine wave
of full-scale amplitude to 16-bit resolution. The track-and-hold
amplifiers sample their respective inputs simultaneously on the
rising edge of CONVST x. The aperture time for the track-and-
hold (that is, the delay time between the external CONVST x
signal and the track-and-hold actually going into hold) is well
matched, by design, across all eight track-and-holds on one
device and from device to device. This matching allows more
than one AD7606/AD7606-6/AD7606-4 device to be sampled
simultaneously in a system.
The end of the conversion process across all eight channels is
indicated by the falling edge of BUSY; and it is at this point that the
track-and-holds return to track mode, and the acquisition time
for the next set of conversions begins.
The conversion clock for the part is internally generated, and
the conversion time for all channels is 4 μs on the AD7606,
3 μs on the AD7606-6, and 2 μs on the AD7606-4. On the AD7606,
the BUSY signal returns low after all eight conversions to indicate
the end of the conversion process. On the falling edge of BUSY,
the track-and-hold amplifiers return to track mode. New data
can be read from the output register via the parallel, parallel
byte, or serial interface after BUSY goes low; or, alternatively,
data from the previous conversion can be read while BUSY is
high. Reading data from the AD7606/AD7606-6/AD7606-4
while a conversion is in progress has little effect on performance
and allows a faster throughput to be achieved. In parallel mode
at VDRIVE > 3.3 V, the SNR is reduced by ~1.5 dB when reading
during a conversion.
ADC TRANSFER FUNCTION
The output coding of the AD7606/AD7606-6/AD7606-4 is
twos complement. The designed code transitions occur midway
between successive integer LSB values, that is, 1/2 LSB and 3/2 LSB.
The LSB size is FSR/65,536 for the AD7606. The ideal transfer
characteristic for the AD7606/AD7606-6/AD7606-4 is shown
011...111
011...110
000...001
000...000
111...111
100...010
100...001
100...000
–FS + 1/2LSB 0V – 1/2LSB +FS – 3/2LSB
A
DC
CO
DE
ANALOG INPUT
+FS
MIDSCALE
–FS
LSB
±10V RANGE +10V
0V
–10V
305V
±5V RANGE
+5V
0V
–5V
152V
+FS – (–FS)
216
LSB =
VIN
5V
REF
2.5V
±5V CODE =
× 32,768 ×
VIN
10V
REF
2.5V
±10V CODE =
× 32,768 ×
08
47
9-
03
7
Figure 39. AD7606/AD7606-6/AD7606-4 Transfer Characteristics
The LSB size is dependent on the analog input range selected.
相關PDF資料 |
PDF描述 |
|---|---|
| MS3124E12-10SW | CONN RCPT 10POS JAM NUT W/SCKT |
| V110A8M200BG | CONVERTER MOD DC/DC 8V 200W |
| MS27473E18B30P | CONN PLUG 30POS STRAIGHT W/PINS |
| V110A8M200BF3 | CONVERTER MOD DC/DC 8V 200W |
| M83723/77R1412N | CONN PLUG 12POS STRAIGHT W/SCKT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7606BSTZ-6 | 功能描述:IC DAS W/ADC 16BIT 6CH 64LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| AD7606BSTZ-6RL | 功能描述:IC DAS W/ADC 16BIT 64LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| AD7606BSTZ-RL | 功能描述:IC DAS W/ADC 16BIT 64LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| AD7607 | 制造商:AD 制造商全稱:Analog Devices 功能描述:8-Channel Differential DAS with 18-Bit, Bipolar, Simultaneous Sampling ADC |
| AD7607BSTZ | 功能描述:IC DAS W/ADC 14BIT 8CH 64LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
發布緊急采購，3分鐘左右您將得到回復。