- 您現在的位置：買賣IC網 > PDF目錄375236 > AD7339 (Analog Devices, Inc.) 5 V Integrated High Speed ADC/Quad DAC System(高速8位A/D轉換器/四路8位D/A轉換器) PDF資料下載
參數資料
| 型號： | AD7339 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | 5 V Integrated High Speed ADC/Quad DAC System(高速8位A/D轉換器/四路8位D/A轉換器) |
| 中文描述： | 5伏集成高速ADC /四路DAC系統（高速8位的A / D轉換器/四路8位的D / A轉換器） |
| 文件頁數： | 12/12頁 |
| 文件大?。?/td> | 170K |
| 代理商： | AD7339 |
–12–
C
P
AD7339
REV. 0
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
52-Lead Plastic Quad Flatpack (PQFP)
(S-52)
(PINS DOWN)
1
13
14
27
26
39
40
52
PIN 1
0.014 (0.35)
0.010 (0.25)
0.557 (14.15)
0.537 (13.65)
0.398 (10.11)
0.390 (9.91)
0
0
0
0
0.0256
(0.65)
BSC
0.082 (2.09)
0.078 (1.97)
0.012 (0.30)
0.006 (0.15)
0.008 (0.20)
0.006 (0.15)
SEATING
PLANE
0.037 (0.95)
0.026 (0.65)
0.094 (2.39)
0.084 (2.13)
GROUNDING AND LAYOUT
The printed circuit board that houses the AD7339 should be
designed so that the analog and digital sections are separated
and confined to certain areas of the board. This facilitates the
use of ground planes that can be easily separated. A minimum
etch technique is generally best for ground planes as it gives the
best shielding.
Digital and analog ground planes should be joined in only one
place. If the AD7339 is the only device requiring an AGND-to-
DGND connection, the ground planes should be connected at
the AGND and DGND pins of the AD7339. If the AD7339 is
in a system where multiple devices require AGND-to-DGND
connections, the connection should be made at one point only,
a star point that should be established as close as possible to the
AD7339. Avoid running digital lines under the device as these
will couple noise onto the die. The analog ground plane should
be allowed to run under the AD7339 to avoid noise coupling.
The power supply lines to the AD7339 should use as large a
track as possible to provide low impedance paths and reduce the
effects of glitches on the power supply line. Fast switching sig-
nals such as clocks should be shielded with digital ground to
avoid radiating noise to other sections of the board. Avoid
crossover of digital and analog signals. Traces at opposite sides
of the board should run at right angles to each other. This will
reduce the effects of feedthrough through the board. A microstrip
technique is by far the best, but is not always possible with a
double-sided board. In this technique, the component side of
the board is dedicated to ground planes while signals are placed
on the other side. Good decoupling is important. The analog
and digital supplies to the AD7339 are independent and sepa-
rately pinned out to minimize coupling between analog and
digital sections of the device. All analog and digital supplies
should be decoupled to AGND and DGND respectively using
0.1
μ
F ceramic capacitors in parallel with 10
μ
F tantalum
capacitors. To achieve the best from the decoupling capaci-
tors, they should be placed as close as possible to the device,
ideally right up against the device. In systems where a com-
mon supply is used to drive both the AVDD and DVDD of
the AD7339, it is recommended that the system’s AVDD sup-
ply be used. This supply should have the recommended analog
supply decoupling between the AVDD pins of the AD7339 and
AGND and the recommended digital supply decoupling capaci-
tors between the DVDD pins and DGND.
相關PDF資料 |
PDF描述 |
|---|---|
| AD734 | 10 MHz, 4-Quadrant Multiplier/Divider(10MHz,四象限乘法器/除法器) |
| AD73511 | Low-Power CMOS Analog Front End with Flash based DSP Microcomputer(帶閃速DSP微計算機的單模擬前端) |
| AD7392 | Parallel Input Micropower 10- and 12-Bit DACs(并行輸入微功耗12位D/A轉換器) |
| AD7395 | +3 V, Dual, Serial Input 12-/10-Bit DACs |
| AD7395AN | +3 V, Dual, Serial Input 12-/10-Bit DACs |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7339BS | 制造商:Analog Devices 功能描述:Data Acquisition System Single ADC Quad DAC 8-Bit 52-Pin MQFP |
| AD7339BS-REEL | 制造商:Analog Devices 功能描述:Data Acquisition System Single ADC Quad DAC 8-Bit 52-Pin MQFP T/R |
| AD7339BSZ-REEL | 功能描述:IC ADC/QUAD DAC 5V W/REF 52-MQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| AD734 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10 MHz, 4-Quadrant Multiplier/Divider |
| AD73411 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Low-Power Analog Front End with DSP Microcomputer |
發布緊急采購，3分鐘左右您將得到回復。