參數資料
型號： A42MX16-1BG100A
廠商： Electronic Theatre Controls, Inc.
元件分類： LED驅動器
英文描述： LED Driver IC; Output Current Max:200mA; Supply Voltage Max:7V; Package/Case:10-MLP; Output Current:200mA; Output Voltage:4.75V; Leaded Process Compatible:Yes; Operating Temp. Max:85 C; Operating Temp. Min:-40 C
中文描述： 40MX和42MX FPGA系列
文件頁數： 28/120頁
文件大?。?/td> 854K
代理商： A42MX16-1BG100A
15
4958B–AUTO–11/10
Atmel ATA6285/ATA6286 [Preliminary]
3.5.4.1
The X-register, Y-register, and Z-register
The registers R26..R31 have some added functions to their general purpose usage. These reg-
isters are 16-bit address pointers for indirect addressing of the data space. The three indirect
address registers X, Y, and Z are defined as described in Figure 3-4.
Figure 3-4.
The X-, Y-, and Z-registers
In the different addressing modes these address registers have functions as fixed displacement,
automatic increment, and automatic decrement (see the instruction set reference for details).
3.5.5
Stack Pointer
The Stack is mainly used for storing temporary data, for storing local variables and for storing
return addresses after interrupts and subroutine calls. The Stack Pointer Register always points
to the top of the Stack. Note that the Stack is implemented as growing from higher memory loca-
tions to lower memory locations. This implies that a Stack PUSH command decreases the Stack
Pointer.
The Stack Pointer points to the data SRAM Stack area where the Subroutine and Interrupt
Stacks are located. This Stack space in the data SRAM must be defined by the program before
any subroutine calls are executed or interrupts are enabled. The Stack Pointer must be set to
point above 0x100, preferably RAMEND. The Stack Pointer is decremented by one when data is
pushed onto the Stack with the PUSH instruction, and it is decremented by two when the return
address is pushed onto the Stack with subroutine call or interrupt. The Stack Pointer is incre-
mented by one when data is popped from the Stack with the POP instruction, and it is
incremented by two when return address is popped from the Stack with return from subroutine
RET or return from interrupt RETI.
The Atmel AVR Stack Pointer is implemented as two 8-bit registers in the I/O space. The
number of bits actually used is implementation dependent. Note that the data space in some
implementations of the Atmel AVR architecture is so small that only SPL is needed. In this case,
the SPH Register will not be present.
In ATA6289 only SP9 and SP8 of High Byte (SPH) are in use.
15
XH
XL
0
X-register
7
0
7
0
R27(0x1B)
R26 (0x1A)
15
YH
YL
0
Y-register
7
0
7
0
R29 (0x1D)
R28 (0x1C)
15
ZH
ZL
0
Z-register
7
0
7
0
R31 (0x1F)
R30 (0x1E)
相關PDF資料
PDF描述
A42MX16-1BG100B IC CHARGE PUMP FLASH LED 10-MLP
A42MX16-1BG100ES Controller IC; Package/Case:16-MLP; Supply Voltage Max:14V; Leaded Process Compatible:Yes; Operating Temp. Max:85 C; Operating Temp. Min:-40 C; Output Voltage Max:6V; Packaging:Cut Tape; Peak Reflow Compatible (260 C):Yes RoHS Compliant: Yes
A42MX16-1BG100I Controller IC; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No
A42MX16-1BG100M Controller IC; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes
A42MX16-1CQ100 Controller IC; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No
相關代理商/技術參數
參數描述
A42MX16-1BG100B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1BG100ES 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:40MX and 42MX FPGA Families
A42MX16-1BG100I 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1BG100M 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:40MX and 42MX FPGA Families
A42MX16-1CQ100 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*