參數資料
型號: 71M6513-IGTR/F
廠商: MAXIM INTEGRATED PRODUCTS INC
元件分類: 模擬信號調理
英文描述: SPECIALTY ANALOG CIRCUIT, PQFP100
封裝: LEAD FREE, LQFP-100
文件頁數: 74/104頁
文件大?。?/td> 1390K
代理商: 71M6513-IGTR/F
71M6513/71M6513H
3-Phase Energy Meter IC
DATA SHEET
SEPTEMBER 2011
2005-2011 Teridian Semiconductor Corporation
Page: 71 of 104
A Maxim Integrated Products Brand
CE
Address
Name
Description
0x33
FREQSEL
Selected phase for the frequency monitor, the phase-to-phase voltage
measurements, and voltage zero crossings:
Phase A: 0 (default)
Phase B: 1
Phase C: 2
0x41
FREQ_X
Fundamental frequency. LSB
6
32
10
587
.
0
2
S
F
Hz
0x4A
I0SQSUM_X
The sum of squared current samples from each element.
LSB = 9.4045*10
-13 IMAX2 / In_82 A2h
0x4B
I1SQSUM_X
0x4C
I2SQSUM_X
0x4D
INSQSUM_X
The sum of squared current samples from the calculated neutral:
+
2
1
0
)
(
I
.
LSB = 1.2539*10
-12 IMAX2 / In_82 A2h
0x4E
V0SQSUM_X
The sum of squared voltage samples from each element.
LSB= 9.4045*10
-13 VMAX2 V2h
0x4F
V1SQSUM_X
0x50
V2SQSUM_X
0x5A
V3SQSUM_X
The sum of squared voltage samples from the V3 input. If CAL_V3 =
8192, then LSB = 9.4045*10
-13 VMAX2 V2h or 9.4045*10-13 IMAX2 I2h
The RMS values can be computed by the MPU from the squared current and voltage samples as per the formulae:
Other Measurement Parameters
PH_AtoB_X and PH_AtoC_X contain phase angle information between the phase voltages, depending on the setting of
FREQ_SEL, as shown in the table below. The phase angle information can be used for phase sequencing and error detection.
If the voltage at the selected phase is missing, the meter accuracy will be reduced.
To maintain accuracy, FREQ_SEL must be set to a phase with an active voltage. For example, in a system where
phase A is lost (which can be detected using the SAG bits or by comparing the voltage VA with a lower limit),
FREQ_SEL must be set to an alternative phase to maintain accuracy.
MAINEDGE_X is useful for implementing a real-time clock based on the input AC signal. MAINEDGE_X is the number of half-
cycles accounted for in the last accumulated interval for the AC signal of the phase specified in the FREQ_SEL register.
ACC
S
RMS
N
F
LSB
VxSQSUM
Vx
=
3600
ACC
S
RMS
N
F
LSB
IxSQSUM
Ix
=
3600
相關PDF資料
PDF描述
71M6513H-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6513H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6513-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6515H-IGTW/F SPECIALTY ANALOG CIRCUIT, PQFP64
71M6515H-IGTWR/F SPECIALTY ANALOG CIRCUIT, PQFP64
相關代理商/技術參數
參數描述
71M6515H 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Energy Meter IC
71M6515H_11 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6515H-DB 功能描述:開發板和工具包 - 8051 71M6515H Demo Brd RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
71M6515H-IGT 制造商:Maxim Integrated Products 功能描述:METERING FRONT END - Rail/Tube
71M6515H-IGT/F 功能描述:計量片上系統 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel