參數資料
型號: 71M6513-IGTR/F
廠商: MAXIM INTEGRATED PRODUCTS INC
元件分類: 模擬信號調理
英文描述: SPECIALTY ANALOG CIRCUIT, PQFP100
封裝: LEAD FREE, LQFP-100
文件頁數: 68/104頁
文件大?。?/td> 1390K
代理商: 71M6513-IGTR/F
71M6513/71M6513H
3-Phase Energy Meter IC
DATA SHEET
AUGUST 2011
Page: 66 of 104
2005-2011 Teridian Semiconductor Corporation
A Maxim Integrated Products Brand
Name
Location
[Bit(s)]
Dir
Description
SSI_BEG[7:0]
SSI_END[7:0]
2071[7:0]
2072[7:0]
R/W
The beginning and ending address of the transfer region of the CE data
memory. If the SSI is enabled, a block of words starting with SSI_BEG and
ending with SSI_END will be sent. SSI_END must be larger than SSI_BEG.
The maximum number of output words is limited by the number of SSI
clocks in a CE code pass—see FIR_LEN, MUX_DIV, and SSI_10M.
SUM_CYCLES
[5:0]
2001[5:0]
R/W
Together w/ PRE_SAMPS, this value determines (for the CE) the number of
samples in one sum cycle between XFER interrupts.
Number of samples = PRE_SAMPS*SUM_CYCLES.
TMUX[3:0]
2000[3:0]
R/W
Selects one of 16 inputs for TMUXOUT.
0 – DGND (analog)
1 – IBIAS (analog)
2 – PLL_2.5V (analog)
3 – VBIAS (analog)
4 – RTM (Real time output from CE)
5 – WDTR_EN (Comparator 1 Output AND V1LT3)
6 – V2_OK (Comparator 2 Output)
7 – V3_OK (Comparator 3 Output)
8 – RXD (from Optical interface)
9 – MUX_SYNC (from MUX_CTRL)
A – CK_10M
B – CK_MPU
C – reserved for production test
D – RTCLK
E – CE_BUSY
F – XFER_BUSY
RESERVED
2005[7]
R/W
Must be zero.
TRIMSEL
20FD
W
Selects the temperature trim fuse to be read with the TRIM register
(TRIMM[2:0]: 4, TRIMBGA: 5, TRIMBGB: 6)
TRIM
20FF
R
Contains TRIMBGA, TRIMBGB, or TRIMM[2:0] depending on the value
written to TRIMSEL. If TRIMBGB = 0 then the IC is a 6513 else the IC is a
6513H.
VERSION[7:0]
2006
R
The silicon revision number. This data sheet does not apply to revisions <
000 0100.
VREF_CAL
2004[7]
R/W
Brings VREF out to the VREF pin. This feature is disabled when
VREF_DIS=1.
VREF_DIS
2004[3]
R/W
Disables the internal voltage reference.
WD_RST
SFR E8[7]
W
Resets the WD timer. The WDT is reset when a 1 is written to this bit. Only
byte operations on the whole WDI register should be used.
WD_OVF
2002[2]
R/W
The WD overflow status bit. This bit is set when the WD timer overflows. It
is powered by the VBAT pin and at boot-up will indicate if the part is
recovering from a WD overflow or a power fault. This bit should be cleared
by the MPU on boot-up. It is also automatically cleared when RESETZ is
low.
相關PDF資料
PDF描述
71M6513H-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6513H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6513-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6515H-IGTW/F SPECIALTY ANALOG CIRCUIT, PQFP64
71M6515H-IGTWR/F SPECIALTY ANALOG CIRCUIT, PQFP64
相關代理商/技術參數
參數描述
71M6515H 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Energy Meter IC
71M6515H_11 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6515H-DB 功能描述:開發板和工具包 - 8051 71M6515H Demo Brd RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
71M6515H-IGT 制造商:Maxim Integrated Products 功能描述:METERING FRONT END - Rail/Tube
71M6515H-IGT/F 功能描述:計量片上系統 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel