REV. 1.0.4 2.25V TO 3.6V QUAD UART WITH 32-BYTE FIFO 1.0 PRODUCT DESCRIPTION The XR16V564 (V564) integrates the functions of 4 " />
參數資料
型號： XR16V564IJ-0A-EVB
廠商： Exar Corporation
文件頁數： 54/54頁
文件大?。?/td> 0K
描述： EVAL BOARD FOR XR16V564 68PLCC
標準包裝： 1
系列： *
XR16V564/564D
9
REV. 1.0.4
2.25V TO 3.6V QUAD UART WITH 32-BYTE FIFO
1.0 PRODUCT DESCRIPTION
The XR16V564 (V564) integrates the functions of 4 enhanced 16C550 Universal Asynchrounous Receiver and
Transmitter (UART). Each UART is independently controlled and has its own set of device configuration
registers. The configuration registers set is 16550 UART compatible for control, status and data transfer.
Additionally, each UART channel has 32 bytes of transmit and receive FIFOs, automatic RTS/CTS hardware
flow control, automatic Xon/Xoff and special character software flow control, infrared encoder and decoder
(IrDA ver 1.0), programmable fractional baud rate generator with a prescaler of dividing by 1 or 4, and data rate
up to 16 Mbps. The XR16V564 can operate from 2.25 to 3.6 volts. The V564 is fabricated with an advanced
CMOS process.
Enhanced FIFO
The V564 QUART provides a solution that supports 32 bytes of transmit and receive FIFO memory, instead of
16 bytes in the ST16C554, or one byte in the ST16C454. The V564 is designed to work with high performance
data communication systems, that require fast data processing time. Increased performance is realized in the
V564 by the larger transmit and receive FIFOs, FIFO trigger level control and automatic flow control
mechanism. This allows the external processor to handle more networking tasks within a given time. For
example, the ST16C554 with a 16 byte FIFO, unloads 16 bytes of receive data in 1.53 ms (This example uses
a character length of 11 bits, including start/stop bits at 115.2Kbps). This means the external CPU will have to
service the receive FIFO at 1.53 ms intervals. However with the 32 byte FIFO in the V564, the data buffer will
not require unloading/loading for 3.1 ms. This increases the service interval giving the external CPU additional
time for other applications and reducing the overall UART interrupt servicing time. In addition, the
programmable FIFO level trigger interrupt and automatic hardware/software flow control is uniquely provided
for maximum data throughput performance especially when operating in a multi-channel system. The
combination of the above greatly reduces the CPU’s bandwidth requirement, increases performance, and
reduces power consumption.
Data Rate
The V564 is capable of operation up to 16 Mbps at 3.3V with 4Xinternal sampling clock rate. The device can
operate at 3.3V with a crystal oscillator of up to 24 MHz crystal on pins XTAL1 and XTAL2, or external clock
source of 64 MHz on XTAL1 pin. With a typical crystal of 14.7456 MHz and through a software option, the user
can set the prescaler bit and sampling rate for data rates of up to 3.68 Mbps.
Enhanced Features
The rich feature set of the V564 is available through the internal registers. Automatic hardware/software flow
control, selectable transmit and receive FIFO trigger levels, selectable baud rates, infrared encoder/decoder
interface, modem interface controls, and a sleep mode are all standard features. MCR bit-5 provides a facility
for turning off (Xon) software flow control with any incoming (RX) character. In the 16 mode INTSEL and MCR
bit-3 can be configured to provide a software controlled or continuous interrupt capability. For backward
compatibility to the ST16C654, the 64-pin LQFP does not have the INTSEL pin. Instead, two different LQFP
packages are offered. The XR16V564DIV operates in the continuous interrupt enable mode by internally
bonding INTSEL to VCC. The XR16V564IV operates in conjunction with MCR bit-3 by internally bonding
INTSEL to GND.
The XR16V564 offers a clock prescaler select pin to allow system/board designers to preset the default baud
rate table on power up. The CLKSEL pin selects the div-by-1 or div-by-4 prescaler for the baud rate generator.
It can then be overridden following initialization by MCR bit-7.
相關PDF資料
PDF描述
RPP30-4824DW CONV DC/DC 30W 18-75V +/-24VOUT
UVY2C100MPD CAP ALUM 10UF 160V 20% RADIAL
5492022-7 CA SM LDD FC(NG)TOFC(NG)65FT
XC61CC1502MR-G IC SUPERVISOR 1.5V SOT23-3
HSC05DRTI-S734 CONN EDGECARD 10POS DIP .100 SLD
相關代理商/技術參數
參數描述
XR16V564IJ-F 功能描述:UART 接口集成電路 UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
XR16V564IJTR-F 制造商:Exar Corporation 功能描述:UART 4-CH 32Byte FIFO 2.5V/3.3V 68-Pin PLCC T/R 制造商:Exar Corporation 功能描述:XR16V564IJTR-F
XR16V564IL 制造商:Rochester Electronics LLC 功能描述: 制造商:Exar Corporation 功能描述:
XR16V564IL-0A-EVB 功能描述:UART 接口集成電路 Supports V564 48 pin QFN, ISA Interface RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
XR16V564IL-F 功能描述:UART 接口集成電路 UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*