Spartan and Spartan-XL FPGA Families Data Sheet
42
DS060 (v2.0) March 1, 2013
Product Specification
R
Product Obsolete/Under Obsolescence
Spartan Family Detailed Specifications
Definition of Terms
In the following tables, some specifications may be designated as Advance or Preliminary. These terms are defined as
follows:
Advance: Initial estimates based on simulation and/or extrapolation from other speed grades, devices, or families. Values
are subject to change. Use as estimates, not for production.
Preliminary: Based on preliminary characterization. Further changes are not expected.
Unmarked: Specifications not identified as either Advance or Preliminary are to be considered Final.
Notwithstanding the definition of the above terms, all specifications are subject to change without notice.
Except for pin-to-pin input and output parameters, the AC parameter delay specifications included in this document are
derived from measuring internal test patterns. All specifications are representative of worst-case supply voltage and junction
temperature conditions. The parameters included are common to popular designs and typical applications.
Spartan Family Absolute Maximum Ratings(1)
Spartan Family Recommended Operating Conditions
Symbol
Description
Value
Units
VCC
Supply voltage relative to GND
–0.5 to +7.0
V
VIN
Input voltage relative to GND(2,3)
–0.5 to VCC +0.5
V
VTS
Voltage applied to 3-state output(2,3)
–0.5 to VCC +0.5
V
TSTG
Storage temperature (ambient)
–65 to +150
°C
TJ
Junction temperature
Plastic packages
+125
°C
Notes:
1.
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions
is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
2.
Maximum DC overshoot (above VCC) or undershoot (below GND) must be limited to either 0.5V or 10 mA, whichever is easier to
achieve.
3.
Maximum AC (during transitions) conditions are as follows; the device pins may undershoot to –2.0V or overshoot to +7.0V, provided
this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100 mA.
4.
For soldering guidelines, see the Package Information on the Xilinx website.
Symbol
Description
Min
Max
Units
VCC
Supply voltage relative to GND, TJ = 0°C to +85°CCommercial
4.75
5.25
V
Supply voltage relative to GND, TJ = –40°C to +100°C(1) Industrial
4.5
5.5
V
VIH
High-level input voltage(2)
TTL inputs
2.0
VCC
V
CMOS inputs
70%
100%
VCC
VIL
Low-level input voltage(2)
TTL inputs
0
0.8
V
CMOS inputs
0
20%
VCC
TIN
Input signal transition time
-
250
ns
Notes:
1.
At junction temperatures above those listed as Recommended Operating Conditions, all delay parameters increase by 0.35% per
°C.
2.
Input and output measurement thresholds are: 1.5V for TTL and 2.5V for CMOS.