- 您現在的位置：買賣IC網 > PDF目錄4176 > XC3042A-7PQ100C (Xilinx Inc)IC LOGIC CL ARRAY 4200GAT 100PQF PDF資料下載
參數資料
| 型號： | XC3042A-7PQ100C |
| 廠商： | Xilinx Inc |
| 文件頁數： | 30/76頁 |
| 文件大小： | 0K |
| 描述： | IC LOGIC CL ARRAY 4200GAT 100PQF |
| 產品變化通告： | Product Discontinuation 27/Apr/2010 |
| 標準包裝： | 1 |
| 系列： | XC3000A/L |
| LAB/CLB數： | 144 |
| RAM 位總計： | 30784 |
| 輸入/輸出數： | 82 |
| 門數： | 3000 |
| 電源電壓： | 4.75 V ~ 5.25 V |
| 安裝類型： | 表面貼裝 |
| 工作溫度： | 0°C ~ 85°C |
| 封裝/外殼： | 100-BQFP |
| 供應商設備封裝： | 100-QFP（14x20） |
| 其它名稱： | 122-1026 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁當前第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁
R
XC3000 Series Field Programmable Gate Arrays
7-38
November 9, 1998 (Version 3.1)
Pin Descriptions
Permanently Dedicated Pins
VCC
Two to eight (depending on package type) connections to
the positive V supply voltage. All must be connected.
GND
Two to eight (depending on package type) connections to
ground. All must be connected.
PWRDWN
A Low on this CMOS-compatible input stops all internal
activity, but retains configuration. All flip-flops and latches
are reset, all outputs are 3-stated, and all inputs are inter-
preted as High, independent of their actual level. When
PWDWN returns High, the FPGA becomes operational
with DONE Low for two cycles of the internal 1-MHz clock.
Before and during configuration, PWRDWN must be High.
If not used, PWRDWN must be tied to VCC.
RESET
This is an active Low input which has three functions.
Prior to the start of configuration, a Low input will delay the
start of the configuration process. An internal circuit senses
the application of power and begins a minimal time-out
cycle. When the time-out and RESET are complete, the
levels of the M lines are sampled and configuration begins.
If RESET is asserted during a configuration, the FPGA is
re-initialized and restarts the configuration at the termina-
tion of RESET.
If RESET is asserted after configuration is complete, it pro-
vides a global asynchronous RESET of all IOB and CLB
storage elements of the FPGA.
CCLK
During configuration, Configuration Clock is an output of an
FPGA in Master mode or Peripheral mode, but an input in
Slave mode. During Readback, CCLK is a clock input for
shifting configuration data out of the FPGA.
CCLK drives dynamic circuitry inside the FPGA. The Low
time may, therefore, not exceed a few microseconds. When
used as an input, CCLK must be “parked High”. An internal
pull-up resistor maintains High when the pin is not being
driven.
DONE/PROG (D/P)
DONE is an open-drain output, configurable with or without
an internal pull-up resistor of 2 to 8 k
. At the completion of
configuration, the FPGA circuitry becomes active in a syn-
chronous order; DONE is programmed to go active High
one cycle either before or after the outputs go active.
Once configuration is done, a High-to-Low transition of this
pin will cause an initialization of the FPGA and start a
reconfiguration.
M0/RTRIG
As Mode 0, this input is sampled on power-on to determine
the power-on delay (214 cycles if M0 is High, 216 cycles if M0
is Low). Before the start of configuration, this input is again
sampled together with M1, M2 to determine the configura-
tion mode to be used.
A Low-to-High input transition, after configuration is com-
plete, acts as a Read Trigger and initiates a Readback of
configuration and storage-element data clocked by CCLK.
By selecting the appropriate Readback option when gener-
ating the bitstream, this operation may be limited to a single
Readback, or be inhibited altogether.
M1/RDATA
As Mode 1, this input and M0, M2 are sampled before the
start of configuration to establish the configuration mode to
be used. If Readback is never used, M1 can be tied directly
to ground or VCC. If Readback is ever used, M1 must use a
5-k
resistor to ground or V
CC, to accommodate the
RDATA output.
As an active-Low Read Data, after configuration is com-
plete, this pin is the output of the Readback data.
User I/O Pins That Can Have Special
Functions
M2
During configuration, this input has a weak pull-up resistor.
Together with M0 and M1, it is sampled before the start of
configuration to establish the configuration mode to be
used. After configuration, this pin is a user-programmable
I/O pin.
HDC
During configuration, this output is held at a High level to
indicate that configuration is not yet complete. After config-
uration, this pin is a user-programmable I/O pin.
LDC
During Configuration, this output is held at a Low level to
indicate that the configuration is not yet complete. After
configuration, this pin is a user-programmable I/O pin. LDC
is particularly useful in Master mode as a Low enable for an
EPROM, but it must then be programmed as a High after
configuration.
INIT
This is an active Low open-drain output with a weak pull-up
and is held Low during the power stabilization and internal
clearing of the configuration memory. It can be used to indi-
cate status to a configuring microprocessor or, as a wired
Product Obsolete or Under Obsolescence
相關PDF資料 |
PDF描述 |
|---|---|
| ABC65DRES-S734 | CONN EDGECARD 130PS .100 EYELET |
| A14V40A-PQG160C | IC FPGA 4K GATES 3.3V 160-PQFP |
| EMC18DTEF | CONN EDGECARD 36POS .100 EYELET |
| A1425A-1PQ160I | IC FPGA 2500 GATES 160-PQFP |
| A1440A-PQG160I | IC FPGA 4K GATES 160-PQFP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XC3042A-7PQ100C0167 | 制造商:Xilinx 功能描述: |
| XC3042A-7PQ100C0262 | 制造商:Xilinx 功能描述: |
| XC3042A-7PQ100C0341 | 制造商:Xilinx 功能描述: |
| XC3042A-7PQ100I | 制造商: 功能描述: 制造商:undefined 功能描述: |
| XC3042A-7PQG100I | 制造商:Xilinx 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。