- 您現在的位置：買賣IC網 > PDF目錄372526 > X1205V8IZT1 (INTERSIL CORP) 2-Wire RTC Real Time Clock/Calendar PDF資料下載
參數資料
| 型號： | X1205V8IZT1 |
| 廠商： | INTERSIL CORP |
| 元件分類： | XO, clock |
| 英文描述： | 2-Wire RTC Real Time Clock/Calendar |
| 中文描述： | REAL TIME CLOCK, PDSO8 |
| 封裝： | 4.40 MM, ROHS COMPLIANT, PLASTIC, TSSOP-8 |
| 文件頁數： | 6/22頁 |
| 文件大?。?/td> | 407K |
| 代理商： | X1205V8IZT1 |
and DTR0 (Non-Volatile)
The digital trimming Bits DTR2, DTR1 and DTR0
adjust the number of counts per second and average
the ppm error to achieve better accuracy.
X1205 – Preliminary Information
REV 1.0.9 8/29/02
Characteristics subject to change without notice.
6 of 22
www.xicor.com
INTERRUPT CONTROL REGISTER (INT)
Interrupt Control and Status Bits (IM, AL1E, AL0E)
There are two Interrupt Control bits, Alarm 1 Interrupt
Enable (AL1E) and Alarm 0 Interrupt Enable (AL0E) to
specifically enable or disable the alarm interrupt signal
output (IRQ). The interrupts are enabled when either the
AL1E and AL0E bits are set to “1”, respectively.
Two volatile bits (AL1 and AL0), associated with the two
alarms respectively, indicate if an alarm has happened.
These bits are set on an alarm condition regardless of
whether the IRQ interrupt is enabled. The AL1 and AL0
bits in the status register are reset by the falling edge of
the eighth clock of a read of the register containing the
bits.
Pulse Interrupt Mode
The pulsed interrupt mode allows for repetitive or
recurring alarm functionality. Hence an repetitive or
recurring alarm can be set for every n
minute, or n
hour, or n
date, or for the same day of
the week. The pulsed interrupt mode can be consid-
ered a repetitive interrupt mode, with the repetition
rate set by the time setting fo the alarm.
th
second, or n
th
th
th
The Pulse Interrupt Mode is enabled when the IM bit is
set.
The Alarm IRQ output will output a single pulse of
short duration (approximately 10-40ms) once the
alarm condition is met. If the interrupt mode bit (IM bit)
is set, then this pulse will be periodic.
ON-CHIP OSCILLATOR COMPENSATION
Digital Trimming Register (DTR) — DTR2, DTR1
DTR2 is a sign bit. DTR2=0 means frequency
compensation is > 0. DTR2=1 means frequency
compensation is < 0.
DTR1 and DTR0 are scale bits. DTR1 gives 10 ppm
adjustment and DTR0 gives 20 ppm adjustment.
A range from -30ppm to +30ppm can be represented
by using three bits above.
Table 3. Digital Trimming Registers
Analog Trimming Register (ATR) (Non-volatile)
Six analog trimming Bits from
ATR5
to
ATR0
are pro-
vided to adjust the on-chip loading capacitance range.
The on-chip load capacitance ranges from 3.25pF to
18.75pF. Each bit has a different weight for capaci-
tance adjustment. In addition, using a Citizen CFS-206
crystal with different ATR bit combinations provides an
estimated ppm range from +116ppm to -37ppm to the
nominal frequency compensation. The combination of
digital and analog trimming can give up to +146ppm
adjustment.
The on-chip capacitance can be calculated as follows:
C
ATR
= [(ATR value, decimal) x 0.25pF] + 11.0pF
Note that the ATR values are in two’s complement,
with ATR(000000) = 11.0pF, so the entire range runs
from 3.25pF to 18.75pF in 0.25pF steps.
The values calculated above are typical, and total load
capacitance seen by the crystal will include approxi-
mately 2pF of package and board capacitance in addi-
tion to the ATR value.
See Application section and Xicor’s Application Note
AN154 for more information.
IM Bit
Interrupt / Alarm Frequency
0
Single Time Event Set By Alarm
1
Repetitive / Recurring Time Event Set By Alarm
DTR Register
DTR2
DTR1
0
0
0
0
1
1
1
1
Estimated frequency
PPM
0 (default)
+10
+20
+30
0
-10
-20
-30
DTR0
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
相關PDF資料 |
PDF描述 |
|---|---|
| X1205V8T1 | 2-Wire RTC Real Time Clock/Calendar |
| X1205V8Z | 2-Wire RTC Real Time Clock/Calendar |
| X1205V8ZT1 | 2-Wire RTC Real Time Clock/Calendar |
| X1205 | 2-Wire RTC Real Time Clock/Calendar |
| X1205S8 | 2-Wire RTC Real Time Clock/Calendar |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X1205V8T1 | 功能描述:IC RTC/CALENDAR 2-WIRE 8-TSSOP RoHS:否 類別:集成電路 (IC) >> 時鐘/計時 - 實時時鐘 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:時鐘/日歷 特點:警報器，閏年，SRAM 存儲容量:- 時間格式:HH:MM:SS（12/24 小時） 數據格式:YY-MM-DD-dd 接口:SPI 電源電壓:2 V ~ 5.5 V 電壓 - 電源，電池:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN EP 包裝:管件 |
| X1205V8Z | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:2-Wire RTC Real Time Clock/Calendar |
| X1205V8ZT1 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:2-Wire RTC Real Time Clock/Calendar |
| X1210MKX7R8BB564 | 制造商:Yageo / Phycomp 功能描述:0.56uF 25V SM CAP-X2Y FILTER 1210 X7R 20% Ni Barr w/100% Tin - free partial T/R at 500. |
| X121198-ISD | 制造商:Honeywell Sensing and Control 功能描述:RESISTIVE & OPTICAL |
發布緊急采購，3分鐘左右您將得到回復。