參數資料
型號： WJLXT972MLC.A4
廠商： INTEL CORP
元件分類： 網絡接口
英文描述： DATACOM, ETHERNET TRANSCEIVER, PQFP48
封裝： ROHS COMPLIANT, LQFP-48
文件頁數： 47/92頁
文件大小： 1257K
代理商： WJLXT972MLC.A4
Intel
LXT972M Single-Port 10/100 Mbps PHY Transceiver
Datasheet
51
Document Number: 302875-005
Revision Date: 27-Oct-2005
5.8.4
10BASE-T Link Integrity Test
In 10BASE-T mode, the LXT972M Transceiver always transmits link pulses.
If the Link Integrity Test function is enabled (the normal configuration), the LXT972M
Transceiver monitors the connection for link pulses. Once link pulses are detected, data
transmission is enabled and remains enabled as long as either the link pulses or data
transmission continue. If the link pulses stop, the data transmission is disabled.
If the Link Integrity Test function is disabled (which can be done by setting Configuration
Register bit 16.14 to ‘1’), the LXT972M Transceiver transmits to the connection regardless of
detected link pulses.
5.8.5
Link Failure
Link failure occurs if the Link Integrity Test is enabled and link pulses or packets stop being
received. If this condition occurs, the LXT972M Transceiver returns to the auto-negotiation phase
if auto-negotiation is enabled. If the Link Integrity Test function is disabled by setting
Configuration Register bit 16.14 to ‘1’, the LXT972M Transceiver transmits packets, regardless of
link status.
5.8.6
10BASE-T SQE (Heartbeat)
By default, the Signal Quality Error (SQE) or heartbeat function is disabled on the LXT972M
Transceiver. To enable this function, set Register bit 16.9 = 1. When this function is enabled, the
LXT972M Transceiver asserts its COL output for 5 to 15 bit times (BT) after each packet.
5.8.7
10BASE-T Jabber
If a transmission exceeds the jabber timer, the LXT972M Transceiver disables the transmit and
loopback functions. For jabber timing parameters, see Figure 26, “Intel LXT972M Transceiver
The LXT972M Transceiver automatically exits jabber mode after the unjabber time has expired.
This function can be disabled by setting Register bit 16.10 = 1.
5.8.8
10BASE-T Polarity Correction
The LXT972M Transceiver automatically detects and corrects for the condition in which the
receive signal (TPIP/N) is inverted. Reversed polarity is detected if eight inverted link pulses - or
four inverted end-of-frame (EOF) markers - are received consecutively. If link pulses or data are
not received by the maximum receive time-out period (96 to 128 ms), the polarity state is reset to a
non-inverted state. When polarity reversal is detected in 10BASE-T operation, register 17.5 is set
相關PDF資料
PDF描述
WJLXT972MLC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WL100/CG/FP1R DATACOM, WIRELESS LAN CIRCUIT, PQFP64
WL100/PR/FP1R DATACOM, WIRELESS LAN CIRCUIT, PQFP64
WL100/CG/FP1R DATACOM, WIRELESS LAN CIRCUIT, PQFP64
WL100/PR/FP1R DATACOM, WIRELESS LAN CIRCUIT, PQFP64
相關代理商/技術參數
參數描述
WJM1000 功能描述:射頻模塊 902-928 MHz US ISM EPC Class 1 Gen 2 RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
WJM3000 功能描述:射頻模塊 902-928 MHz US ISM EPC Class 1 Gen 2 RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
WJ-MP204C-W1 制造商:Black Box Corporation 功能描述:1 year warranty for WJ-MP204C
WJ-MP204C-W3 制造商:Black Box Corporation 功能描述:3 year warranty for WJ-MP204C
WJMX12-SM 制造商:Panasonic Industrial Company 功能描述:SERVICE MANUAL PANASONIC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*