- 您現在的位置：買賣IC網 > PDF目錄382581 > TDA4863 (INFINEON TECHNOLOGIES AG) Boost Controller PDF資料下載
參數資料
| 型號： | TDA4863 |
| 廠商： | INFINEON TECHNOLOGIES AG |
| 英文描述： | Boost Controller |
| 中文描述： | 升壓控制器 |
| 文件頁數： | 6/20頁 |
| 文件大小： | 105K |
| 代理商： | TDA4863 |
2000 Aug 17
6
Philips Semiconductors
Product specification
Vertical deflection booster
TDA4863J; TDA4863AJ
FUNCTIONAL DESCRIPTION
Both the TDA4863J and TDA4863AJ consist of a
differential input stage, a vertical output stage, a flyback
generator, a reference circuit and a thermal protection
circuit.
The TDA4863J operates with a separate flyback supply
voltage (see Fig.1) while the TDA4863AJ generates the
flyback voltage internally by doubling the supply voltage
(see Fig.2).
Differential input stage
Thedifferentialsawtoothinputsignal(e.g.comingfromthe
deflection controller family TDA485X) is connected to the
inputs (inverted signal to pin 6 and non-inverted signal to
pin 7). The vertical feedback signal is superimposed on
the inverted signal on pin 6.
Vertical output and thermal protection
The vertical output stage is a quasi-complementary
class-B amplifier with a high linearity.
The output stage is protected against thermal overshoots.
For a junction temperature T
j
> 150
°
C this protection will
be activated and will reduce then the deflection current (I
5
).
Flyback generator
The flyback generator supplies the vertical output stage
during flyback.
The TDA4863J is used with separate flyback supply
voltage to achieve a short flyback time with minimized
power dissipation.
The TDA4863AJ needs a capacitor C
F
between
pins 2 and 3 (see Fig.2). Capacitor C
F
is charged during
scan, using the external diode D1 and resistor R5. During
flyback the cathode of capacitor C
F
is connected to the
positive supply voltage and the flyback voltage is then
twice the supply voltage. For the TDA4863AJ the
resistor R6 in the positive supply line can be used to
reduce the power consumption.
In parallel with the deflection coil a damping resistor R
P
and an RC combination (R
S1
= 5.6
and C
S1
= 100 nF)
are needed. Furthermore, another additional
RC combination (R
S2
= 5.6
and C
S2
= 47 to 150 nF)
can be used to minimize the noise effect and the flyback
time (see Figs 9 and 10).
相關PDF資料 |
PDF描述 |
|---|---|
| TDA4863G | Boost Controller |
| TDA4866 | Full bridge current driven vertical deflection booster |
| TDA4881 | Advanced monitor video controller |
| TDA8012M | Low power PLL FM demodulator for satellite TV receivers |
| TDA8024 | ECONOLINE: RB & RA - Dual Output from a Single Input Rail- Power Sharing on Output- Industry Standard Pinout- 1kVDC & 2kVDC Isolation- Custom Solutions Available- UL94V-0 Package Material- Efficiency to 85% |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA4863_05 | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Low THD |
| TDA48632 | 功能描述:功率因數校正 IC RoHS:否 制造商:Fairchild Semiconductor 開關頻率:300 KHz 最大功率耗散: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Reel |
| TDA4863-2 | 功能描述:功率因數校正 IC BOOST CONTROLLER FOR HI PWR FACTOR/LW THD RoHS:否 制造商:Fairchild Semiconductor 開關頻率:300 KHz 最大功率耗散: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Reel |
| TDA4863-2_05 | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power-Factor Controller (PFC) IC for High Power Factor and Low THD |
| TDA48632G | 功能描述:功率因數校正 IC RoHS:否 制造商:Fairchild Semiconductor 開關頻率:300 KHz 最大功率耗散: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。