參數資料
型號: STDS75M2E
廠商: 意法半導體
元件分類: 溫度/濕度傳感器
英文描述: Digital temperature sensor and thermal watchdog
中文描述: 數字溫度傳感器和熱看門狗
文件頁數: 18/37頁
文件大小: 204K
代理商: STDS75M2E
Functional description
STDS75
18/37
3.1.3
Temperature register
The Temperature register is a two-byte (16-bit) “Read only” register (see
Table 8 on
page 18
). Digital temperatures from the ADC are stored in the Temperature Register in
two’s complement format, and the contents of this register are updated each time the A/D
conversion is finished.
The user can read data from the Temperature Register at any time. When a A/D conversion
is completed, the new data is loaded into a comparator buffer to evaluate fault conditions,
and will update the Temperature Register if a read cycle is not ongoing. The STDS75 is
continuously evaluating fault conditions regardless of READ or WRITE activity on the bus. If
a READ is ongoing, the previous temperature will be read. The readable temperature will be
updated upon the completion of the next A/D conversion that is not masked by a read cycle.
Depending on the A/D conversion resolution, the 9-, 10-, 11- or 12-bit MSBs of the register
will contain temperature data. All unused bits following the digital temperature will be zero.
The MSB (Bit 15) of the Temperature Register denotes whether the temperature data is
positive or negative. A '0' in Bit 15 is positive and a '1' is negative.
Table 8.
Note:
These are comparable formats to the DS75 and LM75.
3.1.4
Over-limit temperature register (T
OS
)
The T
OS
Register is a two-byte (16-bit) READ/WRITE register that stores the user-
programmable upper trip-point temperature for the thermal alarm in two’s complement
format (see
Table 9 on page 19
). This register defaults to 80°C at power-up (i.e., 0101 0000
0000 0000).
The format of the T
OS
Register is identical to that of the Temperature Register. The 4 LSBs
of the T
OS
Register are hardwired to zero, so data written to these register bits will be
ignored. The MSB position contains the sign bit for the digital temperature and Bit14
contains the temperature MSB.
The resolution setting for the A/D conversion determines how many bits of the T
OS
Register
are used by the thermal alarm. For example, for 9-bit conversions, the trip-point temperature
is defined by the 9 MSBs of the T
OS
register, and all remaining bits are “Don’t cares.”
Temperature register format
Bytes
MS Byte
LS Byte
Bits
MSB
THSB
TLSB
LSB
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
STDS75
SB
TMSB TD
TD
TD
TD TD TD
9-bit
LSB
10-bit
LSB
11-bit
LSB
12-bit
LSB
0
0
0
0
Keys:
SB =Two’s complement Sign Bit
TMSB =Temperature MSB
TLSB =Temperature LSB
TD =Temperature Data
相關PDF資料
PDF描述
STDS75M2F Digital temperature sensor and thermal watchdog
STE2001DIE1 65 X 128 SINGLE CHIP LCD CONTROLLER / DRIVER
STE2001DIE2 65 X 128 SINGLE CHIP LCD CONTROLLER / DRIVER
STE2004S M16C; M16C/60 Series; Microcontroller; Bit Size: 32/16-bit CISC; ROM: 320K; RAM: 31K; ROM Type: Mask ROM; CPU: M16C/60 core; Minimum Instruction Execution Time (ns): 41.7 (@24MHz); Operating Frequency / Supply Voltage: 24MHz/3.0 to 5.5V, 10MHz/2.7 to 5.5V; Operating Ambient Temperature (°C): -20 to 85, -40 to 85; Package Code: PLQP0128KB-A (128P6Q-A)
STE2004SDIE2 102 x 65 single-chip LCD controller/driver
相關代理商/技術參數
參數描述
STDS75M2F 功能描述:板上安裝溫度傳感器 Digital Temp Snsr Thermal Watchdog RoHS:否 制造商:Omron Electronics 輸出類型:Digital 配置: 準確性:+/- 1.5 C, +/- 3 C 溫度閾值: 數字輸出 - 總線接口:2-Wire, I2C, SMBus 電源電壓-最大:5.5 V 電源電壓-最小:4.5 V 最大工作溫度:+ 50 C 最小工作溫度:0 C 關閉: 安裝風格: 封裝 / 箱體: 設備功能:Temperature and Humidity Sensor
STDT2000100 制造商:Seagate Technology 功能描述:2TB BACKUP PLUS USB 3.0 3.5IN DESKTOP DRIVE TUXEDO BLACK - Bulk
STDT3000100 制造商:Seagate Technology 功能描述:3TB BACKUP PLUS USB 3.0 3.5IN DESKTOP DRIVE TUXEDO BLACK - Bulk
STDT4000100 制造商:Seagate Technology 功能描述:4TB BACKUP PLUS USB 3.0 3.5IN DESKTOP DRIVE TUXEDO BLACK
STD-TAG 功能描述:電線鑒定 WIRE MKR TAG DISP RoHS:否 制造商:TE Connectivity / Q-Cees 產品:Labels and Signs 類型: 材料:Vinyl 顏色:Blue 寬度:0.625 in 長度:1 in