參數資料
型號： SST48CF024
廠商： Silicon Storage Technology, Inc.
英文描述： CompactFlash Card
中文描述： CF卡
文件頁數： 11/60頁
文件大小： 572K
代理商： SST48CF024
Data Sheet
CompactFlash Card
SST48CF008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 / 256
11
2001 Silicon Storage Technology, Inc.
S71125-03-000
9/01
375
-OE
(PC Card Memory Mode)
I
9
This is an Output Enable strobe generated by the host interface. It is
used to read data from the CompactFlash card in Memory Mode and
to read the CIS and configuration registers.
In PC Card I/O Mode, this signal is used to read the CIS and configu-
ration registers.
To enable True IDE Mode this input should be grounded by the host.
-OE
(PC Card I/O Mode)
-ATA SEL
(True IDE Mode)
RDY/-BSY
PC Card Memory Mode)
O
37
In Memory Mode this signal is set high when the CompactFlash Card
is ready to accept a new data transfer operation and held low when
the card is busy. The Host memory card socket must provide a pull-
up resistor.
At power up and at Reset, the RDY/-BSY signal is held low (busy)
until the CompactFlash card has completed its power up or reset
function. No access of any type should be made to the Compact-
Flash card during this time. The RDY/-BSY signal is held high (dis-
abled from being busy) whenever the following condition is true: The
CompactFlash Card has been powered up with +RESET continu-
ously disconnected or asserted.
I/O Operation - After the CompactFlash card has been configured for
I/O operation, this signal is used as -Interrupt Request. This line is
strobed low to generate a pulse mode interrupt or held low for a level
mode interrupt.
In True IDE Mode signal is the active high Interrupt Request to the
host.
This signal is used during Memory Cycles to distinguish between
Common Memory and Register (Attribute) Memory Attribute Memory
Select accesses. High for Common Memory, Low for Attribute Mem-
ory.
The signal must also be active (low) during I/O Cycles when the I/O
address is on the Bus.
In True IDE Mode this input signal is not used and should be con-
nected to V
DD
by the host.
When the pin is high, this signal Resets the CompactFlash Card. The
CompactFlash card is Reset only at power up if this pin is left high or
open from power-up. The CompactFlash card is also Reset when the
Soft Reset bit in the Card Configuration Option Register is set.
This signal is the same as the PC Card Memory Mode signal.
-IREQ
PC Card I/O Mode)
INTRQ
(True IDE Mode)
-REG
(PC Card Memory Mode)
I
44
-REG
PC Card I/O Mode)
-REG
(True IDE Mode)
RESET
(PC Card Memory Mode)
I
41
RESET
(PC Card I/O Mode)
-RESET
(True IDE Mode)
V
DD
(PC Card Memory Mode)
V
DD
(PC Card I/O Mode)
V
DD
(True IDE Mode)
In the True IDE Mode this input pin is the active low hardware reset
from the host.
+5.0V, +3.3V power.
-
13,38
This signal is the same for all modes.
This signal is the same for all modes.
TABLE
2-2: S
IGNAL
D
ESCRIPTION
(C
ONTINUED
) (3
OF
4)
Symbol
Type
1
Pin
Name and Functions
相關PDF資料
PDF描述
SST48CF032 CompactFlash Card
SST48CF032-C1 CompactFlash Card
SST48CF048 CompactFlash Card
SST48CF048-C1 CompactFlash Card
SST48CF064 CompactFlash Card
相關代理商/技術參數
參數描述
SST48CF024-C1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF032 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF032-C1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF048 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF048-C1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*