- 您現在的位置：買賣IC網 > PDF目錄2017 > SSM2604CPZ-REEL (Analog Devices Inc)IC AUDIO CODEC LP 20-LFCSP PDF資料下載
參數資料
| 型號： | SSM2604CPZ-REEL |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 3/28頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AUDIO CODEC LP 20-LFCSP |
| 標準包裝： | 5,000 |
| 類型： | 立體聲音頻 |
| 數據接口： | 串行 |
| 分辨率（位）： | 24 b |
| ADC / DAC 數量： | 2 / 2 |
| 三角積分調變： | 無 |
| S/N 比，標準 ADC / DAC (db)： | 90 / 100 |
| 電壓 - 電源，模擬： | 1.8 V ~ 3.6 V |
| 電壓 - 電源，數字： | 1.5 V ~ 3.6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 20-VFQFN 裸露焊盤，CSP |
| 供應商設備封裝： | 20-LFCSP-VQ |
| 包裝： | 帶卷 (TR) |
第1頁第2頁當前第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
Data Sheet
SSM2604
Rev. A | Page 11 of 28
THEORY OF OPERATION
DIGITAL CORE
Inside the SSM2604 digital core is a central clock source, called
the master clock (MCLK), that produces a reference clock for
all internal audio data processing and synchronization. When
using an external clock source to drive the MCLK pin, great
care should be taken to select a clock source with less than 50 ps
of jitter. Without careful generation of the MCLK signal, the
digital audio quality likely suffers.
To enable the SSM2604 to generate the central reference clock
in a system, connect a crystal oscillator between the MCLK/XTI
input pin and the XTO output pin.
To allow an external device to generate the central reference
clock, apply the external clock signal directly through the MCLK/
XTI input pin. In this configuration, the oscillator circuit of the
SSM2604 can be powered down by using the OSC bit (Register
R6, Bit D5) to reduce power consumption.
To accommodate applications with very high frequency master
clocks, the internal core reference clock of the SSM2604 can be
set to either MCLK or MCLK divided by 2. This is enabled by
adjusting the setting of the CLKDIV2 bit (Register R8, Bit D6).
Complementary to this feature, the CLKOUT pin can also drive
external clock sources with either the core clock signal or the
core clock divided by 2 by enabling the CLKODIV2 bit
(Register R8, Bit D7).
ADC AND DAC
The SSM2604 contains a pair of oversampling Σ- ADCs.
The maximum ADC full-scale input level is 1.0 V rms when
AVDD = 3.3 V. If the input signal to the ADC exceeds this
level, data overloading occurs and causes audible distortion.
The ADC accepts analog audio input from the stereo line
inputs. The digital data from the ADC output, once converted,
is processed using the ADC filters.
Complementary to the ADC channels, the SSM2604 contains a
pair of oversampling Σ- DACs that convert the digital audio
data from the internal DAC filters into an analog audio signal.
The DAC output can also be muted by setting the DACMU bit
(Register R5, Bit D3) in the control register.
ADC HIGH-PASS AND DAC DE-EMPHASIS FILTERS
The ADC and DAC employ separate digital filters that perform
24-bit signal processing. The digital filters are used for both
record and playback modes and are optimized for each individ-
ual sampling rate used.
For recording mode operations, the unprocessed data from the
ADC enters the ADC filters and is converted to the appropriate
sampling frequency, and then is output to the digital audio
interface.
For playback mode operations, the DAC filters convert the digital
audio interface data to oversampled data, using a sampling rate
selected by the user. The oversampled data is processed by the
DAC and then is sent to the analog output mixer by enabling
the DACSEL (Register R4, Bit D4).
Users have the option of setting up the device so that any dc
offset in the input source signal is automatically detected and
removed. To accomplish this, enable the digital high-pass filter
(see Table 2 for characteristics) contained in the ADC digital
filters by using the ADCHPF bit (Register R5, Bit D0).
In addition, users can implement digital de-emphasis by using
the DEEMPH bits (Register R5, Bit D1 and Bit D2).
相關PDF資料 |
PDF描述 |
|---|---|
| SY100E195JY TR | IC DELAY LINE 128TAP 28-PLCC |
| SY100EP195VTI TR | IC DELAY LINE 1024TAP 32-TQFP |
| SY100EP196VTI TR | IC DELAY LINE 1024TAP 32-TQFP |
| SY10E196JZ TR | IC DELAY LINE 7TAP 28-PLCC |
| SY10EL1189ZC TR | IC DRIVER CABLE LOOP CIRC 16SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SSM2604CPZ-REEL7 | 功能描述:IC AUDIO CODEC LP 20-LFCSP RoHS:是 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:立體聲音頻 數據接口:串行 分辨率（位）:18 b ADC / DAC 數量:2 / 2 三角積分調變:是 S/N 比，標準 ADC / DAC (db):81.5 / 88 動態范圍，標準 ADC / DAC (db):82 / 87.5 電壓 - 電源，模擬:2.6 V ~ 3.3 V 電壓 - 電源，數字:1.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-WFQFN 裸露焊盤 供應商設備封裝:48-TQFN-EP（7x7） 包裝:帶卷 (TR) |
| SSM2604-EVALZ | 功能描述:BOARD EVAL SSM2604 RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信，線路接口單元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板，電源，線纜，CD 其它名稱:82EBV2081 |
| SSM2605GY | 制造商:SSC 制造商全稱:Silicon Standard Corp. 功能描述:P-CHANNEL ENHANCEMENT MODE POWER MOSFET |
| SSM26PT | 制造商:CHENMKO 制造商全稱:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER RECTIFIER |
| SSM2761P-A | 制造商:SSC 制造商全稱:Silicon Standard Corp. 功能描述:N-CHANNEL ENHANCEMENT MODE POWER MOSFET |
發布緊急采購，3分鐘左右您將得到回復。