參數資料
型號: SL28506BZIT
廠商: Silicon Laboratories Inc
文件頁數: 3/28頁
文件大?。?/td> 0K
描述: IC CLOCK CK505 PCIE GEN2 64TSSOP
標準包裝: 2,000
類型: 時鐘/頻率發生器
PLL:
主要目的: Intel CPU 服務器
輸入: 時鐘,晶體
輸出: HCSL,LVCMOS
電路數: 1
比率 - 輸入:輸出: 1:22
差分 - 輸入:輸出: 無/是
頻率 - 最大: 400MHz
電源電壓: 3.135 V ~ 3.465 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 64-TFSOP (0.240",6.10mm 寬)
供應商設備封裝: 64-TSSOP
包裝: 帶卷 (TR)
SL28506
....................... DOC #: SP-AP-0021 (Rev AA) Page 11 of 28
Byte 13: Control Register 13
Bit
@Pup
Name
Description
7
1
USB_Bit1
USB drive strength control, See Byte 18 for more setting
0 = Low, 1= High
6
1
PCI/PCIF_Bit1
PCI drive strength control, See Byte 18 for more setting
0 = Low, 1 = High
5
0
PLL1_Spread
Select percentage of spread for PLL1
0 = 0.5%, 1=0.45%
4
0
SATA_SS_EN
Enable SATA spread modulation,
0 = Spread Disabled 1 = Spread Enabled
3
1
EN_CFG0_SET
By defalult CFG0 pin strap sets the SMBus initial values to select the HW
mode. When this bit is written0, subsequent SMBus accesses is the Lathes
Open state, can overwrite the CFG0 pin setting into the SMBus bits and set
the mode before the M0 state: specifically B0b2, B1b[6,4,3], B9b1, B11b5
2
1
SE1/SE2_Bit1
SE1 and SE2 drive strength control, See Byte 18 for more setting
0 = Low, 1 = High
1
RESERVED
0
1
SW_PCI
SW PCI_STP# Function
0 = SW PCI_STP assert, 1 = SW PCI_STP deassert
When this bit is set to 0, all STOPPABLE PCI, PCIF and SRC outputs will
be stopped in a synchronous manner with no short pulses.
When this bit is set to 1, all STOPPED PCI, PCIF and SRC outputs will
resume in a synchronous manner with no short pulses.
Byte 14: Control Register 14
Bit
@Pup
Name
Description
7
0
CPU_DAF_N7
If Prog_CPU_EN is set, the values programmed in CPU_DAF_N[8:0] and
CPU_DAF_M[6:0] will be used to determine the CPU output frequency. The
setting of the FS_Override bit determines the frequency ratio for CPU and
other output clocks. When it is cleared, the same frequency ratio stated in
the Latched FS[C:A] register will be used. When it is set, the frequency ratio
stated in the FSEL[2:0] register will be used
6
0
CPU_DAF_N6
5
0
CPU_DAF_N5
4
0
CPU_DAF_N4
3
0
CPU_DAF_N3
2
0
CPU_DAF_N2
1
0
CPU_DAF_N1
0
CPU_DAF_N0
Byte 15: Control Register 15
Bit
@Pup
Name
Description
7
0
CPU_DAF_N8
See Byte 14 for description
6
0
CPU_DAF_M6
If Prog_CPU_EN is set, the values programmed are in CPU_FSEL_N[8:0]
and CPU_FSEL_M[6:0] will be used to determine the CPU output
frequency. The setting of the FS_Override bit determines the frequency
ratio for CPU and other output clocks. When it is cleared, the same
frequency ratio stated in the Latched FS[C:A] register will be used. When it
is set, the frequency ratio stated in the FSEL[2:0] register will be used
5
0
CPU_DAF_M5
4
0
CPU_DAF_M4
3
0
CPU_DAF_M3
2
0
CPU_DAF_M2
1
0
CPU_DAF_M1
0
CPU_DAF_M0
Byte 16: Control Register 16
Bit
@Pup
Name
Description
相關PDF資料
PDF描述
ISL83490IB IC TXRX RS485/422 3.3V LP 8-S
ISL83488IP IC TXRX RS485/422 3.3V LP 8-D
ISL83488IB-T IC TXRX RS485/422 3.3V LP 8-S
SL28506BZC IC CLOCK CK505 PCIE GEN2 64TSSOP
ISL83485IP IC TXRX RS485/422 3.3V LP 8-D
相關代理商/技術參數
參數描述
SL28540ALC 功能描述:時鐘發生器及支持產品 Low Power for Intel Mobile RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56
SL28540ALCT 功能描述:時鐘發生器及支持產品 Low Power for Intel Mobile RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56
SL28541BQCR 功能描述:時鐘發生器及支持產品 Montevina, Atom RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56
SL28541BQCRT 功能描述:時鐘發生器及支持產品 Montevina, Atom RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56
SL28541BZC 功能描述:時鐘發生器及支持產品 Montevina RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56