
Chapter 21 Freescale’s Scalable Controller Area Network (S12MSCANV2)
MC9S12XF - Family Reference Manual, Rev.1.19
974
Freescale Semiconductor
NOTE
The CANTIER register is held in the reset state when the initialization mode
is active (INITRQ = 1 and INITAK = 1). This register is writable when not
in initialization mode (INITRQ = 0 and INITAK = 0).
21.3.2.9
MSCAN Transmitter Message Abort Request Register (CANTARQ)
The CANTARQ register allows abort request of queued messages as described below.
NOTE
The CANTARQ register is held in the reset state when the initialization
mode is active (INITRQ = 1 and INITAK = 1). This register is writable when
not in initialization mode (INITRQ = 0 and INITAK = 0).
1. Read: Anytime
Write: Anytime when not in initialization mode
Table 21-14. CANTIER Register Field Descriptions
Field
Description
2-0
TXEIE[2:0]
Transmitter Empty Interrupt Enable
0 No interrupt request is generated from this event.
1 A transmitter empty (transmit buffer available for transmission) event causes a transmitter empty interrupt
request.
Module Base + 0x0008
Access: User read/write(1)
1. Read: Anytime
Write: Anytime when not in initialization mode
76543210
R
00000
ABTRQ2
ABTRQ1
ABTRQ0
W
Reset:
00000000
= Unimplemented
Figure 21-12. MSCAN Transmitter Message Abort Request Register (CANTARQ)
Table 21-15. CANTARQ Register Field Descriptions
Field
Description
2-0
ABTRQ[2:0]
Abort Request — The CPU sets the ABTRQx bit to request that a scheduled message buffer (TXEx = 0) be
aborted. The MSCAN grants the request if the message has not already started transmission, or if the
transmission is not successful (lost arbitration or error). When a message is aborted, the associated TXE (see
transmit interrupt occurs if enabled. The CPU cannot reset ABTRQx. ABTRQx is reset whenever the associated
TXE ag is set.
0 No abort request
1 Abort request pending