參數資料
型號: SC16C550
廠商: NXP Semiconductors N.V.
英文描述: Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
中文描述: 通用異步接收器/發送器(UART),16字節FIFO和紅外線(IrDA)編碼器/解碼器
文件頁數: 29/52頁
文件大?。?/td> 639K
代理商: SC16C550
Philips Semiconductors
SC16C550
UART with 16-byte FIFO and IrDA encoder/decoder
Product data
Rev. 05 — 19 June 2003
29 of 52
9397 750 11619
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
7.8 Modem Status Register (MSR)
This register provides the current state of the control interface signals from the
modem, or other peripheral device to which the SC16C550 is connected. Four bits of
this register are used to indicate the changed information. These bits are set to a
logic 1 whenever a control input from the modem changes state. These bits are set to
a logic 0 whenever the CPU reads this register.
0
LSR[0]
Receive data ready.
Logic 0 = No data in receive holding register or FIFO (normal default
condition).
Logic 1 = Data has been received and is saved in the receive holding
register or FIFO.
Table 19:
Bit
Line Status Register bits description
…continued
Symbol
Description
Table 20:
Bit
7
Modem Status Register bits description
Symbol
Description
MSR[7]
Data Carrier Detect
. DCD (Active-HIGH, logical 1). Normally this bit is
the complement of the DCD input. In the loop-back mode this bit is
equivalent to the OUT2 bit in the MCR register.
MSR[6]
Ring Indicator
. RI (Active-HIGH, logical 1). Normally this bit is the
complement of the RI input. In the loop-back mode this bit is equivalent
to the OUT1 bit in the MCR register.
MSR[5]
Data Set Ready
. DSR (Active-HIGH, logical 1). Normally this bit is the
complement of the DSR input. In loop-back mode this bit is equivalent to
the DTR bit in the MCR register.
MSR[4]
Clear To Send
. CTS. CTS functions as hardware flow control signal
input if it is enabled via EFR[7]. The transmit holding register flow control
is enabled/disabled by MSR[4]. Flow control (when enabled) allows
starting and stopping the transmissions based on the external modem
CTS signal. A logic 1 at the CTS pin will stop SC16C550 transmissions
as soon as current character has finished transmission. Normally
MSR[4] is the complement of the CTS input. However, in the loop-back
mode, this bit is equivalent to the RTS bit in the MCR register.
MSR[3]
DCD
[1]
Logic 0 = No DCD change (normal default condition).
Logic 1 = The DCD input to the SC16C550 has changed state since
the last time it was read. A modem Status Interrupt will be generated.
MSR[2]
RI
[1]
Logic 0 = No RI change (normal default condition).
Logic 1 = The RI input to the SC16C550 has changed from a logic 0 to
a logic 1. A modem Status Interrupt will be generated.
6
5
4
3
2
相關PDF資料
PDF描述
SC16C550IA44 Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C550IB48 Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554IB64 Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554 Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554DB 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
相關代理商/技術參數
參數描述
SC16C550B 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V UART with 16-byte FIFOs
SC16C550BIA44 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C550BIA44,512 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C550BIA44,518 功能描述:UART 接口集成電路 1CH. UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C550BIA44,529 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel