參數資料
型號： SAB9079HS
廠商： NXP SEMICONDUCTORS
元件分類： 畫面疊加
英文描述： Circular Connector; No. of Contacts:15; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Socket; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-15
中文描述： PICTURE-IN-PICTURE IC, PQFP128
封裝： 14 X 20 MM, 2.72 MM HEIGHT, SHRINK, PLASTIC, SOT-387-3, QFP-128
文件頁數： 19/48頁
文件大?。?/td> 183K
代理商： SAB9079HS
2000 Jan 13
19
Philips Semiconductors
Preliminary specification
Multistandard Picture-In-Picture (PIP)
controller
SAB9079HS
MFld and SFld
The number of fields stored in the VDRAM can be set with
the MFld and SFld bits. There is a limit of 4 Mbits which
can be stored. It is best to set these bits so that 3 fields
are stored for the sub channel and 2 for the main channel,
but this is not possible in all cases (large PIPs). Therefore,
the number of fields stored can be reduced. This can
result in some performance loss, e.g. if the sub channel is
set to 1 field joint line errors can appear.
IntOff, DNonInt, MNonInt and SNonInt
In automatic interlace mode (IntOff is logic 0) the device
calculateswhetherinterlacedornon-interlacedsignalsare
applied and acts accordingly. This can be overruled by
setting bit IntOff to logic 1. Bits DNonInt, MNonint and
SNonInt then determine the interlace. If the xNonInt bits
are set to logic 0 the device is put in interlaced mode, if
they are set to logic 1 the main, sub and/or display
channels are put in non-interlaced mode. DNonint
overrules MNonint (main and display channels are
coupled).
PalOff, DPal, MPal and SPal
In automatic mode (PalOff is logic 0) the device calculates
what type of signal is applied, PAL or NTSC. In the event
that the number of lines in a field is less than 287 it is
assumed to be NTSC, otherwise it is assumed to be PAL.
This can be overruled by setting PalOff to logic 1.
The xPal bits then determine the mode of the device. A
logic 0 sets the device in NTSC mode, a logic 1 to PAL
mode. DPAL overrules MPAL (main and display channels
are coupled).
PRIO, NipCoff, Fmt411, DFilt and Yth
The PRIO bit sets the priority between the main and sub
channels. A logic 0 gives priority to the sub channel which
means that the sub channel PIPs, if present, are placed on
top of the main PIP. A logic 1 places the main PIP on top
of the sub PIPs. The NiPCoff bit determines whether a
grey bar is inserted in case a NTSC PIP is displayed in a
PIP with PAL PIP size. The missing lines are equally
dividedbetweenthetoppartandthebottompartofthePIP
window and made 30% grey. If this bit is logic 0 the grey
bar is displayed, if this bit is logic 1 the grey bar is omitted
and the PIP data is shifted up. The Fmt411 bit sets the
YUV format. If this bit is logic 0 then the device is in
4 : 2 : 2 YUV mode, if this bit is logic 1 then the device is in
4 : 1 : 1 YUV mode. If the 4 : 2 : 2 format is used the
memory use is larger, so some modes are not available
and the length of a read/write cycle is larger. The Dfilt bit
controls an interpolating filter to expand the internal
720 pixels data rate to the output data rate of 2
×
720
pixels in 1FH mode. If DFilt is logic 1 then the filter is on.
The Yth
(3 : 0)
bits control the video output. If the current
Y value is less then Yth
×
16 then the fast blanking is
switched off, and the original live background will be
visible. This feature can be used to pick up sub-titles and
display them as OSD anywhere on the screen.
Table 10
overview of the I
2
C-bus sub addresses
SUB
ADDRESS
DATA BYTES
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
I
2
CHold
BIT 2
BIT 1
BIT 0
00H
01H
02H
03H
04H
MPIPON
YUVFilter
(1 : 0)
IntOff
PRIO
SPIPON
MFreeze
MNonInt
Fmt411
SFreeze
SNonInt
DFilt
FillSet
FillOff
MiS
MFld
(1 : 0)
CTE
Paloff
SFld
(1 : 0)
LTE
(2 : 0)
MPal
DNonInt
NipCoff
DPal
SPal
Yth
(3 : 0)
相關PDF資料
PDF描述
SAB9080 Circular Connector; No. of Contacts:18; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Pin; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-18
SAB9080H Circular Connector; No. of Contacts:18; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Pin; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-18
SAB9081 Circular Connector; No. of Contacts:18; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Socket; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-18
SAB9081H Circular Connector; No. of Contacts:18; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Socket; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-18
SAB9082 Circular Connector; No. of Contacts:19; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Pin; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-19
相關代理商/技術參數
參數描述
SAB9080 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:NTSC Picture-In-Picture PIP controller
SAB9080H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:NTSC Picture-In-Picture PIP controller
SAB9081 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard Picture-In-Picture PIP controller
SAB9081H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard Picture-In-Picture PIP controller
SAB9082 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:NTSC Picture-In-Picture PIP controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*