
S6B0759 PRELIMINARY SPEC. VER. 1.2
81 COM / 128 SEG DRIVER & CONTROLLER FOR STN LCD
57
Dynamic Current Consumption (2) when The Internal Power Supply is ON
Table 20
.
. Dynamic Current 2 (Internal Power)
(V
DD
= 2.4V, Ta = 25
°
C)
Max.
Unit
Item
Symbol
Condition
Min.
Typ.
Pin used
V0 - Vss = 12.0V, x5 boosting,
duty = 1/81, normal mode
(Display Off)
-
100
150
μΑ
*10
Dynamic current
consumption (2)
I
DD2
V0 - Vss = 12.0V, x5 boosting,
duty = 1/81, normal mode
(Display On , Checker Pattern)
-
210
300
μΑ
*10
Current Consumption during Power Save Mode
Table 21. Power Save Mode Current
(V
DD
= 2.4V, Ta = 25
°
C)
Max.
Unit
Item
Symbol
Condition
Min.
Typ.
Pin used
Sleep mode
current
I
DDS1
During sleep
-
-
2
μΑ
*10
Table 22. The Relationship between Oscillation Frequency and Frame Frequency
Duty ratio
Item
F
CL
F
osc
1/N
On-chip oscillator circuit is
used
(f
OSC
: oscillation frequency, f
CL
: display clock frequency, f
FR
: frame frequency, N = 17 to 81)
F
FR x
N
f
FR x
4
x
N
[* Remark Solves]
*1. Though the wide range of operating voltages is guaranteed, a spike voltage change may affect the voltage
assurance during access from the MPU.
*2. In case of external power supply is applied.
*3. CS1B, RS, DB0 to DB7, E_RD, RW_WR, RESETB, PS1, PS0, INTRS, and REF
*4. DB0 to DB7
*5. Applies when the DB0 to DB7 pins are in high impedance.
*6. Resistance value when -0.1[mA] is applied during the ON status of the output pin SEGn or COMn.
RON [k
] =
V[V] / 0.1[mA] (
V : voltage change when -0.1[mA] is applied in the ON status.)
*7. See Table 22 for the relationship between oscillation frequency and frame frequency.
*8. The voltage regulator circuit adjusts V0 within the voltage follower operating voltage range.
*9. On-chip reference voltage source of the voltage regulator circuit to adjust V0.
*10. Applies to the case where the on-chip oscillation circuit is used and no access is made from the MPU.
The current consumption, when the built-in power supply circuit is ON or OFF.
The current flowing through voltage regulation resistors(Rb and Ra) is not included.
It does not include the current of the LCD panel capacity, wiring capacity, etc.