參數資料
型號: R5F56218BDBG#U0
廠商: Renesas Electronics America
文件頁數: 114/148頁
文件大?。?/td> 0K
描述: MCU 32BIT FLASH 512KROM 176LFBGA
產品培訓模塊: RX Compare Match Timer
RX DMAC
標準包裝: 1
系列: RX600
核心處理器: RX
芯體尺寸: 32-位
速度: 100MHz
連通性: CAN,EBI/EMI,I²C,SCI,SPI,USB
外圍設備: DMA,LVD,POR,PWM,WDT
輸入/輸出數: 126
程序存儲器容量: 512KB(512K x 8)
程序存儲器類型: 閃存
RAM 容量: 96K x 8
電壓 - 電源 (Vcc/Vdd): 2.7 V ~ 3.6 V
數據轉換器: A/D 8x10/12b,D/A 2x10b
振蕩器型: 內部
工作溫度: -40°C ~ 85°C
封裝/外殼: 176-LFBGA
包裝: 托盤
PIC18F6520/8520/6620/8620/6720/8720
DS39609B-page 66
2004 Microchip Technology Inc.
5.4
Erasing Flash Program Memory
The minimum erase block is 32 words or 64 bytes. Only
through the use of an external programmer, or through
ICSP control, can larger blocks of program memory be
bulk erased. Word erase in the Flash array is not
supported.
When initiating an erase sequence from the micro-
controller itself, a block of 64 bytes of program memory
is erased. The Most Significant 16 bits of the
TBLPTR<21:6> point to the block being erased.
TBLPTR<5:0> are ignored.
The EECON1 register commands the erase operation.
The EEPGD bit must be set to point to the Flash pro-
gram memory. The WREN bit must be set to enable
write operations. The FREE bit is set to select an erase
operation.
For protection, the write initiate sequence for EECON2
must be used.
A long write is necessary for erasing the internal Flash.
Instruction execution is halted while in a long write
cycle. The long write will be terminated by the internal
programming timer.
5.4.1
FLASH PROGRAM MEMORY
ERASE SEQUENCE
The sequence of events for erasing a block of internal
program memory location is:
1.
Load Table Pointer with address of row being
erased.
2.
Set the EECON1 register for the erase
operation:
set EEPGD bit to point to program memory;
clear the CFGS bit to access program
memory;
set WREN bit to enable writes;
set FREE bit to enable the erase.
3.
Disable interrupts.
4.
Write 55h to EECON2.
5.
Write AAh to EECON2.
6.
Set the WR bit. This will begin the row erase
cycle.
7.
The CPU will stall for duration of the erase
(about 2 ms using internal timer).
8.
Execute a NOP.
9.
Re-enable interrupts.
EXAMPLE 5-2:
ERASING A FLASH PROGRAM MEMORY ROW
MOVLW
CODE_ADDR_UPPER
; load TBLPTR with the base
MOVWF
TBLPTRU
; address of the memory block
MOVLW
CODE_ADDR_HIGH
MOVWF
TBLPTRH
MOVLW
CODE_ADDR_LOW
MOVWF
TBLPTRL
ERASE_ROW
BSF
EECON1, EEPGD
; point to Flash program memory
BCF
EECON1, CFGS
; access Flash program memory
BSF
EECON1, WREN
; enable write to memory
BSF
EECON1, FREE
; enable Row Erase operation
BCF
INTCON, GIE
; disable interrupts
MOVLW
55h
MOVWF
EECON2
; write 55H
Required
MOVLW
AAh
Sequence
MOVWF
EECON2
; write AAH
BSF
EECON1, WR
; start erase (CPU stall)
NOP
BSF
INTCON, GIE
; re-enable interrupts
相關PDF資料
PDF描述
MAX9205EAI/V+ IC SERIALIZER BUS/LVDS 28SSOP
VI-BVM-IX-F3 CONVERTER MOD DC/DC 10V 75W
CONN012 CONN N-MALE R/A END CRIMP RG-174
MS27497E18A66S CONN RCPT 66POS WALL MNT W/SCKT
CONN007 CONN N-MALE END CRIMP RG-174
相關代理商/技術參數
參數描述
R5F56218BDFB 制造商:Renesas Electronics Corporation 功能描述:MCU 32BIT RX621 144QFP
R5F56218BDFB#V0 功能描述:MCU 32BIT FLASH 512K ROM 144LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:RX600 標準包裝:96 系列:PIC® 16F 核心處理器:PIC 芯體尺寸:8-位 速度:20MHz 連通性:I²C,SPI 外圍設備:欠壓檢測/復位,POR,PWM,WDT 輸入/輸出數:11 程序存儲器容量:3.5KB(2K x 14) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:128 x 8 電壓 - 電源 (Vcc/Vdd):2.3 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:14-TSSOP(0.173",4.40mm 寬) 包裝:管件
R5F56218BDFP 制造商:Renesas Electronics Corporation 功能描述:MCU 32BIT RX621 100QFP
R5F56218BDFP#V0 功能描述:MCU 32BIT FLASH 512KROM 100LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:RX600 標準包裝:1 系列:87C 核心處理器:MCS 51 芯體尺寸:8-位 速度:16MHz 連通性:SIO 外圍設備:- 輸入/輸出數:32 程序存儲器容量:8KB(8K x 8) 程序存儲器類型:OTP EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4 V ~ 6 V 數據轉換器:- 振蕩器型:外部 工作溫度:0°C ~ 70°C 封裝/外殼:44-DIP 包裝:管件 其它名稱:864285
R5F56218BDLD 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:100 MHz 32-bit RX MCU with FPU, 165 DMIPS, up to 512-Kbyte Flash, Ethernet, USB 2.0