- 您現在的位置：買賣IC網 > PDF目錄368362 > PUB01 PDF資料下載
參數資料
| 型號： | PUB01 |
| 文件頁數： | 2/4頁 |
| 文件大?。?/td> | 183K |
| 代理商： | PUB01 |
2
Specifications are subject to change without notice (21.10.00)
DUB01, PUB01
Mode of Operation
DUB01 and PUB01 monitor
both AC and DC over or
under voltage.
Example 1
(no connection between ter-
minals Z1, Y1 or 8, 9 - latch
function disabled)
The relay operates when the
measured value exceeds (or
drops below) the set level for
more than the set delay time.
It releases when the voltage
drops below (or exceeds) the
set level (see hysteresis set-
ting), or when power supply
is interrupted.
Example 2
(connection between termi-
nals Z1, Y1 or 8, 9 - latch
function enabled)
The relay operates and latch-
es in operating position
when the measured value
exceeds (or drops below) the
set level for more than the
set delay time.
Provided that the voltage
has dropped below (or has
exceeded) the set point (see
hysteresis setting) the relay
releases when the intercon-
nection between terminals
Z1, Y1 or 8, 9 is interrupted,
or power supply is interrupt-
ed as well.
The yellow LED flashes until
the delay time has expired or
the measured value has
dropped below the set point
(see hysteresis setting).
Note
When the inhibit contact is
opened, if the input signal is
already in alarm position, the
delay time needs to elapse
before relay activation.
Power supply
Rated operational voltage
through terminals:
A1, A2 or A3, A2 (DUB01)
2, 10 or 11, 10 (PUB01)
Overvoltage cat. III
(IEC 60664, IEC 60038)
724:
B48:
24 VDC ± 20%, insulated
24/48 VAC ± 15%
45 to 65 Hz, insulated
115/230 VAC ± 15%
45 to 65 Hz, insulated
DC supply
2 kV
4 kV
4 kV
B23:
Dielectric voltage
Supply to input
Supply to output
Input to output
Rated operational power
AC
DC
AC supply
4 kV
4 kV
4 kV
4 VA
3 W
Supply Specifications
Power ON delay
Reaction time
1 s ± 0.5 s or 6 s ± 0.5 s
(input signal variation from
-20% to +20% or from
+20% to -20% of set value)
< 100 ms
< 100 ms
(15 min warm-up time)
± 1000 ppm/°C
± 10% on set value ± 50 ms
± 0.5% on full-scale
Alarm ON delay
Alarm OFF delay
Accuracy
Temperature drift
Delay ON alarm
Repeatability
Indication for
Power supply ON
Alarm ON
LED, green
LED, red (flashing 2 Hz
during delay time)
LED, yellow
Output relay ON
Environment
Degree of protection
Pollution degree
Operating temperature
Storage temperature
Housing dimensions
DIN-rail version
Plug-in version
Weight
Screw terminals
Tightening torque
IP 20
3 (DUB01), 2 (PUB01)
-20 to 60°C, R.H. < 95%
-30 to 80°C, R.H. < 95%
22.5 x 80 x 99.5 mm
36 x 80 x 87 mm
Approx. 150 g
Max. 0.5 Nm
acc. to IEC 60947
Yes
CE-Marking
General Specifications
相關PDF資料 |
PDF描述 |
|---|---|
| PUB02CT23 | |
| PUB2000TEST | pub2000 distiller driver test |
| PUB4320(PU4320) | 複合デバイス － パワートランジスタアレイ |
| PUB4325(PU4325) | 複合デバイス － パワートランジスタアレイ |
| PUB4310(PU4310) | 複合デバイス － パワートランジスタアレイ |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PUB01CB2310V | 制造商:Carlo Gavazzi 功能描述:Relay, Voltage Level 制造商:Carlo Gavazzi 功能描述:115-230V VOLT. LEVEL RELAY 制造商:Carlo Gavazzi 功能描述:RELAY, PHASE CONTROL, SPDT, 1 PHASE, 10V; Contact Configuration:SPDT; Phase Type:1 Phase; Power Consumption:4VA; Supply Voltage Max:230V; Switching Voltage Max:10V; Relay Mounting:Socket; Series:PUB01 |
| PUB01CB23500V | 制造商:Carlo Gavazzi 功能描述:Relay, E-Mech, Voltage Monitor, SPDT, Cur-Rtg 8/5AAC/ADC, Ctrl-V 115/230AC, Pnl-Mnt 制造商:Carlo Gavazzi 功能描述:Time-Delay Relay 制造商:Carlo Gavazzi 功能描述:Time-Delay Relay, Contact Configuration:SPDT, Nom Input Voltage:230VAC, Time Min:0.1s, Time Max:30s, Relay Mounting:Quick Connect, Contact Rating:8A, Delay Time Range:0.1s to 30s, No. of Poles:1 |
| PUB01CD4810V | 制造商:Carlo Gavazzi 功能描述:Relay, Monitoring, Plug In, SPDT, Supply: 24-48VAC/VDC, Measures: 0.1-10VAC/VDC |
| PUB01CD48500V | 制造商:Carlo Gavazzi 功能描述:Relay, Voltage Level Monitoring, 1-Phase True RMS AC/DC Over or Under Voltage |
| PUB02CT23 | 制造商:Carlo Gavazzi 功能描述:Relay, Over Voltage / Under Voltage 制造商:Carlo Gavazzi 功能描述:Voltage Monitoring Relay 制造商:Carlo Gavazzi 功能描述:VOLTAGE MONITORING RELAY, SPDT, 230VAC; Contact Configuration:SPDT; Power Consumption:4VA; Supply Voltage Max:230VAC; Relay Mounting:Quick Connect ; Control Voltage Type:AC; Series:-; Carry Current:8A; Control Voltage:250V |
發布緊急采購，3分鐘左右您將得到回復。