參數資料
型號： PM6670STR
廠商： STMICROELECTRONICS
元件分類： 穩壓器
英文描述： 3 A SWITCHING CONTROLLER, QCC24
封裝： 4 X 4 MM, LEAD FREE, VFQFPN-24
文件頁數： 31/54頁
文件大小： 742K
代理商： PM6670STR
PM6670S
Device description
Doc ID 14432 Rev 4
37/54
7.2
VTTREF buffered reference and VTT LDO section
The PM6670S provides the required DDR2/3 reference voltage on the VTTREF pin. The
internal buffer tracks half the voltage on the VSNS pin and has a sink and source capability
up to 15 mA.
Higher currents rapidly deteriorate the output accuracy. A 10 nF to 100 nF (33 nF typ.)
bypass capacitor to SGND is required for stability.
The VTT low-drop-out linear regulator has been designed to sink and source up to 2 A peak
current and 1 A continuously. The VTT voltage tracks VTTREF within ± 35 mV.
A remote voltage sensing pin (VTTSNS) is provided to recovery voltage drops due to
parasitic resistance. In DDR2/3 applications, the linear regulator input LDOIN is typically
connected to VDDQ output; connecting LDOIN pin to a lower voltage, if available in the
system, reduces the power dissipation of the LDO.
A minimum output capacitance of 20
μF (2x10 μF MLCC capacitors) is enough to assure
stability and fast load transient response.
7.2.1
VTT and VTTREF Soft-Start
Soft-Start on VTT and VTTREF outputs is achieved by current clamping.
The LDO linear regulator is provided with a current foldback protection: when the output
voltage exits the internal ±10 % VTT-Good window, the output current is clamped at ±1 A.
Re-entering VTT-Good window releases the current limit clamping.
The foldback mechanism naturally implements a two steps soft-start charging the output
capacitors with a 1 A constant current.
Something similar occurs at VTTREF pin, where the output capacitor is smoothly charged at
a fixed 40 mA current limit.
7.2.2
VTTREF and VTT outputs discharge
The tracking discharge mechanism involves the VTT linear regulator. When the suspend-to-
disk state is entered, the switching regulator is turned OFF.
At the same time the LDO drains a 1 A constant current from LDOIN and keeps VTT in track
with VTTREF that, in turn, is half the voltage at the VSNS pin. When the VDDQ output
reaches 400 mV, the PM6670S switches on the internal discharge MOSFETs to complete
In soft discharge (i.e. non-tracking discharge) the PM6670S disables the internal regulators
and suddenly turns on the discharge MOSFETs on each output.
相關PDF資料
PDF描述
PM6670S 3 A SWITCHING CONTROLLER, QCC24
PM6670TR 1.4 A SWITCHING CONTROLLER, QCC24
PM6670ATR 1.4 A SWITCHING CONTROLLER, QCC24
PM6670 1.4 A SWITCHING CONTROLLER, QCC24
PM6675ASTR 3 A SWITCHING CONTROLLER, QCC24
相關代理商/技術參數
參數描述
PM6670TR 功能描述:直流/直流開關調節器 Complete DDR2/3 Mem Pwr supply controllr RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5
PM6675 制造商:STMicroelectronics 功能描述: 制造商:STMicroelectronics 功能描述:LDO CNTRLR STDN 0.6V TO 3.3V/1.5V 24PIN VFQFPN - Rail/Tube
PM6675AS 功能描述:DC/DC 開關控制器 DDR 2/3 Memory Pwr Cntrl RoHS:否 制造商:Texas Instruments 輸入電壓:6 V to 100 V 開關頻率: 輸出電壓:1.215 V to 80 V 輸出電流:3.5 A 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:CPAK
PM6675ASTR 功能描述:低壓差控制器 - LDO Complete DDR2/3 Mem Pwr supply controllr RoHS:否 制造商:Micrel 最大輸入電壓:5.5 V 輸出電壓:Adjustable 輸出電流:10 mA 負載調節: 輸出類型:Adjustable, Fixed 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-23-6
PM6675ATR 功能描述:低壓差控制器 - LDO High eff SD CNRL RoHS:否 制造商:Micrel 最大輸入電壓:5.5 V 輸出電壓:Adjustable 輸出電流:10 mA 負載調節: 輸出類型:Adjustable, Fixed 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-23-6
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*