
RoHS Compliant XFP Optical Transceiver
—850 nm for up to 300m Reach
PLRXXL Series
Key Features
850 nm optical signals for up to 300 m reach over enhanced
multimode ber
Low power consumption (< 1.5 W max)
0
°C to 70°C case temperature operating range
9.95 Gb/s to 10.75 Gb/s serial optical and electrical interface
Durable plastic bail delatch mechanism
LC receptacle optical connector
Bit error rate < 1×10-12
Excellent EMI performance
High reliability
Requires only 3.3 V and 1.8 V power supplies
Digital Diagnostic Monitoring support
XFI AC-coupled electrical interface
Support both line and XFI system loopback
The JDSU 10 Gb/s 850 nm XFP optical transceiver is a cost-effective, fully duplex,
high-reliability optoelectronic (O/E) transceiver that transmits and receives stan-
dard compliant high-speed serial 10 Gb/s optical and electrical signals. The JDSU 10
Gb/s XFP optical transceiver provides a single product solution for the IEEE802.3
2005 Clause 52 10GBASE-SR, 10GBASE-SW, and 10GFC optical interconnects that
are used in Telecommunication, Data Communication, and Storage Area Network
applications. The module complies with the 10 Gigabit Small Form Factor Pluggable
(XFP) Multi-Source Agreement (MSA).
The RoHS6/6 compliant XFP optical transceiver features a JDSU 850 nm Vertical
Cavity Surface Emitting Laser (VCSEL) and a PIN photodiode. The XFI electrical
interface uses 10 Gb/s differential data channels for communications to the mod-
ule as specied in the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source
Agreement (MSA). The transceiver’s MSA compliant “hot-z-pluggable” mechanical
design provides the system designer a small footprint 10 Gb/s solution and enables
high density front-panel designs with up to 16 10G ports per line card. The JDSU 10
Gb/s XFP optical transceiver is a 850 nm wavelength optical transceiver targeted at
short reach applications. Link lengths greater than 300 m can be achieved on 2000
MHzkm multimode ber.
Applications
Local Area Network (LAN)
Storage Area Network (SAN)
10 Gigabit Ethernet 10GBASE-SR and
10GBASE-SW applications
10G Fibre Channel optical interconnects
Ethernet switches and applications
Fibre Channel switches and applications
Compliance
Compliant with XFP MSA INF8077i
Rev. 4.5
RoHS6/6 compliant
IEEE802.3 2005 Clause 52 standard
10 GFC 1200-MX-SN-I standard
Class 1 Laser Safety
Tested in accordance with Telcordia
GR-468 standard
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
COMMUNICATIONS MODULES & SUBSYSTEMS