PIC32MX5XX/6XX/7XX
DS61156G-page 188
2009-2011 Microchip Technology Inc.
Module Differential Current(7) for PIC32MX534/564/664/764 Family Devices
DC41c
—
10
μA
—
2.5V
Watchdog Timer Current:
ΔIWDT (Notes 3,6)
DC41d
5
—
μA
—
3.3V
Watchdog Timer Current:
ΔIWDT (Note 3)
DC41e
—
20
μA
—
3.6V
Watchdog Timer Current:
ΔIWDT (Note 3)
DC42c
—
40
μA
—
2.5V
RTCC + Timer1 w/32 kHz Crystal:
ΔIRTCC (Notes 3,6)
DC42d
23
—
μA
—
3.3V
RTCC + Timer1 w/32 kHz Crystal:
ΔIRTCC (Note 3)
DC42e
—
50
μA
—
3.6V
RTCC + Timer1 w/32 kHz Crystal:
ΔIRTCC (Note 3)
DC43c
—
1300
μA
—
2.5V
ADC:
ΔIADC (Notes 3,4,6)
DC43d
1100
—
μA
—
3.3V
ADC:
ΔIADC (Notes 3,4)
DC43e
—
1300
μA
—
3.6V
ADC:
ΔIADC (Notes 3,4)
TABLE 31-7:
DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature
-40°C
≤TA ≤+85°C for Industrial
-40°C
≤TA ≤+105°C for V-Temp
Param.
No.
Typical(2)
Max.
Units
Conditions
Note 1:
Base IPD is measured with all digital peripheral modules and being clocked, CPU clock is disabled. All I/Os
are configured as inputs and pulled low. WDT and FSCM are disabled.
2:
Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3:
The
Δ current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
4:
Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5:
Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6:
This parameter is characterized, but not tested in manufacturing.
7:
This information is preliminary.