2
PS8573D
11/11/08
PI90LV387/PI90LVB387
High-Speed Differential Line Drivers
Supply Voltage Range, VCC(2)........................................ –0.5V to 4V
Voltage Range: Inputs ............................................ –0.5V to 6V
DO+ or DO–............................................................. –0.5V to 4V
Electrostatic Discharge(3):
(DO+,DO– and GND).......................Class 3, A: 10kV, B:700V
(All Pins) ..........................................Class 3, A: 8kV, B:600V
Continuous Power Dissipation......(see dissipation rating table)
Storage Temperature Range ............................. –65°C to 150°C
Lead Temperature 1.6mm (1/16 inch)
from case for 10 seconds...............................................260°C
Absolute Maximum Ratings
(Over Operating Free-Air Temperature, unless otherwise noted)(1)
Notes:
1.
Stresses beyond those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other
conditions beyond those indicated under “Recommended Operating
Conditions” is not implied. Exposure to Absolute-Maximum-Rated
conditions for extended periods may affect device reliability.
2.
All voltage values, except differential I/O bus voltages, are with
respect to ground terminal.
3.
Tested in accordance with MIL-STD-883C Method 3015.7
Recommended Operating Conditions
Min.
Nom.
Max.
Units
Supply Voltage, VCC
3.0
3.3
3.6
V
High-level Input Voltage, VIH
2.0
Low-level Input Voltage, VIL
0.8
Operating free-air tempera-
ture, TA
-40
85
C
Driver Function Table
Differential Input
Enables
Outputs
DIN
EN
DOUT+
DOUT-
HH
H
L
LH
L
H
XL
Z
Open
H
L
H
Notes:
1.
H = high level,
L = low level,
X = irrelevent,
Z = high impedance (off)
08-0295