
BurrBrown Products
from Texas Instruments
FEATURES
DESCRIPTION
PCM3052A
SLES160 – NOVEMBER 2005
24-BIT, 96-kHz STEREO AUDIO CODEC WITH
MICROPHONE AMPLIFIER, BIAS, MUXTIPLEXER, AND PGA
Multiple Functions With I2C Interface:
Microphone Amplifier and Bias
– Digital De-Emphasis: 32-, 44.1-, 48-kHz
– Monaural Microphone Amplifier: 34-dB Gain
– Zipper-Noise-Free Digital Attenuation and
at Differential Input
Soft Mute for DAC
– Microphone Bias: 1 mA at 3.75 V
– HPF Bypass Control for ADC
Multiplexer and PGA
– S/PDIF Output Control
– Multiplex of Stereo Single-Ended Line
– Power Down: ADC/DAC Independently
Inputs and Monaural Microphone Amplifier
External Power-Down Pin:
– 0.1 Vrms to 1.5 Vrms Full-Scale Input Range
– ADC/DAC Simultaneously
– 22-k
Input Resistance at 0.1-Vrms Input
Audio Data Format: 24-Bit I2S Only
– 20 dB to –4 dB/range, 1 dB/step PGA
Sampling Rate:
Reference Output:
±10 mA at 2.5 V
– 16–96 kHz for Both ADC and DAC
24-Bit Delta-Sigma ADC and DAC
System Clock: 256 fS Only
Stereo ADC:
Dual Power Supplies:
– Full-Scale Input: 3 Vp-p
– 5 V for Analog and 3.3 V for Digital
– Antialiasing Filter Included
Package: VQFN-32
– 1/64 Decimation Filter:
Pass-Band Ripple: ±0.05 dB
Stop-Band Attenuation: –65 dB
The PCM3052A is a low-cost, single-chip, 24-bit
stereo
audio
codec
(ADC
and
DAC)
with
– On-Chip High-Pass Filter: 0.91 Hz at
single-ended analog voltage input and output. It also
fS = 48 kHz
has an analog front end consisting of a 34-dB
– High Performance:
microphone amplifier, microphone bias generator, 2
THD+N: –94 dB (Typical)
stereo multiplexers, and a wide-range PGA. Analog-
to-digital
converters
(ADCs)
employ
delta-sigma
SNR: 101 dB (Typical)
modulation with 64-times oversampling. On the other
Dynamic Range: 101 dB (Typical)
hand, digital-to-analog converters (DACs) employ
Stereo DAC:
modulation with 64- and 128-times oversampling.
ADCs include a digital decimation filter with a
– Single-Ended Voltage Output: 4 Vp-p
high-pass
filter,
and
DACs
include
an
8-times
– Analog Low-Pass Filter Included
oversampling
digital
interpolation
filter.
The
–
×8 Oversampling Digital Filter:
PCM3052A has many functions which are controlled
Pass-Band Ripple: ±0.03 dB
using the I2C interface: DAC digital de-emphasis,
digital attenuation, soft mute etc. The PCM3052A
Stop-Band Attenuation: –50 dB
also has an S/PDIF output pin for the DAC digital
– High Performance:
input. The power-down mode, which works on ADCs
THD+N: –97 dB (Typical)
and DACs simultaneously, is provided by an external
pin. The PCM3052A is suitable for a wide variety of
SNR: 105 dB (Typical)
cost-sensitive
PC
audio
(recorder
and
player)
Dynamic Range: 104 dB (Typical)
applications where good performance is required.
S/PDIF Output for DAC Digital Input
The PCM3052A is fabricated using a highly advanced
A
CMOS process and is available in a small 32-pin
VQFN package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
System Two, Audio Precision are trademarks of Audio Precision, Inc.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.