- 您現在的位置：買賣IC網 > PDF目錄363666 > NSE-5310 (AUSTRIAMICROSYSTEMS AG) 0,488μm/step (I2C, PWM) PDF資料下載
參數資料
| 型號： | NSE-5310 |
| 廠商： | AUSTRIAMICROSYSTEMS AG |
| 元件分類： | 線性位移傳感器 |
| 英文描述： | 0,488μm/step (I2C, PWM) |
| 文件頁數： | 15/22頁 |
| 文件大?。?/td> | 431K |
| 代理商： | NSE-5310 |
www.ams.com
Revision 1.5
15 - 22
NSE-5310
Datasheet - Application Information
Figure 12. PWMOutput Signal
8.7 Magnetic Strip Requirements
The NSE-5310 requires a magnetic strip with alternate poles (North-South) of pole length of 1 mm and pole pair length of 2 mm. A half pole is
required at each end of the strip. The length of the strip determines the maximum measured stroke; it must be 3 mm greater than the stroke in 1
mm increments (1.5 mm on each end).
A circular magnet may be used to achieve off-axis rotary encoding.
8.7.1 Mounting the Magnet
Vertical Distance:
As a rule of thumb, the gap between chip and magnet should be of the pole length, that is Z=0.5mm for the 1.0mm pole
length of the magnets. However, the gap also depends on the strength of the magnet. The NSE-5310 automatically adjusts for fluctuating
magnet strength by using an automatic gain control (AGC). The vertical distance should be set such that the NSE-5310 is in the “green” range.
See Z-axis Range Indication (“Red/Yellow/Green” Indicator) on page 14
for more details.
Alignment of Multi-pole Magnet and IC:
When aligning the magnet strip or ring to the NSE-5310, the centerline of the magnet strip should
be placed exactly over the Hall array. A lateral displacement in Y-direction (across the width of the magnet) is acceptable as long as it is within
the active area of the magnet. The active area in width is the area in which the magnetic field strength across the width of the magnet is constant
with reference to the centerline of the magnet.
Table 13. Magnetic Strip Requirements
Parameter
Value
Note
Pole length
1 mm
Pole pair length
2 mm ± 1.2%
Accuracy of magnetic pole length determines accuracy of linear
measurement
Magnetic strip length
Stroke + 3 mm
The magnet strip must be in 1 mm increments. A pole is required
at each end.
Magnetic strip area
1 mm X 2 mm
Size recommended for TSSOP package
Magnetic field temp drift
-0.2%/K max
Recommended - for example Samarium Cobalt ReComa28 is -
0.035%/K
4098μs
4097μs
1/f
PWM
PW
MAX
PW
MIN
1999.5 μm
(Pos 4095)
0 μm
(Pos 0)
Position
1μs
相關PDF資料 |
PDF描述 |
|---|---|
| NSF2250WT1 | NPN Silicon Oscillator and Mixer Transistor(NPN硅振蕩器與混頻晶體管) |
| NSHU550E | 2 x 110 W class-D power amplifer, SOT411-1 (DBS23P), Tube |
| NSHU590A | SPECIFICATIONS FOR NICHIA UV LED |
| NSHU590B | SPECIFICATIONS FOR NICHIA UV LED |
| NSPB300A | SPECIFICATIONS FOR NICHIA BLUE LED |
相關代理商/技術參數 |
參數描述 |
|---|---|
| NSE-5310_07 | 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:Miniature Position Encoder with Zero Reference and IC Output |
| NSE-5310ASDF | 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:Miniature Position Encoder SOIC with Zero Reference and I2C Output |
| NSE-5310ASST | 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:Miniature Position Encoder SOIC with Zero Reference and I2C Output |
| NSE-5310-ASST | 功能描述:IC ENCODER LINEAR 20-TSSOP RoHS:是 類別:傳感器，轉換器 >> 磁性 - 霍爾效應，數字式開關，線性，羅盤 (IC) 系列:- 標準包裝:1 系列:- 傳感范圍:20mT ~ 80mT 類型:旋轉 電源電壓:4.5 V ~ 5.5 V 電流 - 電源:15mA 電流 - 輸出（最大）:- 輸出類型:數字式，PWM，8.5 位串行 特點:可編程 工作溫度:-40°C ~ 150°C 封裝/外殼:20-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:20-SSOP 包裝:Digi-Reel® 其它名稱:AS5132-HSST-500DKR |
| NSE-5310ASSU | 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:Miniature Position Encoder SOIC with Zero Reference and I2C Output |
發布緊急采購，3分鐘左右您將得到回復。