![](http://datasheet.mmic.net.cn/180000/NQ60T60EGV05NNS-G_datasheet_11338950/NQ60T60EGV05NNS-G_1.png)
Technical
Specification
NQ60x60EGx05
Product # NQ60x60EGx05
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005408 Rev. C
07/14/10
Page 1
NiQor eighth-brick module
Non-Isolated
9 - 60V
0 - 60V
5.0A
Non-
Eighth-brick
Continuous Input
Outputs
Current
Isolated
DC-DC Converter
Contents
Page No.
Control Features
Operational Features
Ultra high efficiency, up to 95% at full rated load
Delivers up to 5.0A of output current
Input Voltage Range: 9 - 60V
Output voltage range: 0 - 60V (negative output is possible)
Extensive on-board input and output filtering
No minimum load requirement means no preload
resistors required
Buck or buck-boost mode available
Adjustable current limit with current monitor (C option)
Protection Features
Input under-voltage lockout protects the converter at low
input voltage conditions
Over-current shutdown protects converter from excessive
load current or short circuits
Output over-voltage protection protects load from
damaging voltages
Thermal shutdown protects converter from abnormal
environmental conditions
On/Off control
Output voltage trim permits custom voltages
Remote Sense (S option, standard)
Current limit trim (C option)
Safety Features
●
UL 60950-1:2003
● EN60950-1:2001
● IEC 61000-4-2
The NiQor eighth-brick dc-dc converter is a non-isolated buck-
boost regulator, which employs synchronous rectification to
achieve extremely high conversion efficiency. The High Input
Voltage NiQor Brick family of converters can be used in
traditional DPA (distributed power architecture) systems or
provide a regulated output voltage from a battery source or
other variable voltage source. The NiQor eighth-brick family
can be configured to Buck the input voltage down to a lower
voltage or Boost the input voltage up to a higher voltage
using a single external resistor. These modules are RoHS 6/6
compliant (see page 10).
Mechanical Features
Industry standard quarter-brick pin-out configuration
Sizes: Encased - 0.99" x 2.39" (25x60.6 mm)
Flanged - 1.45" x 2.4" (36,8 x 60,6mm)
Total height:
0.50" (12.7 mm)
Total weight: Encased - 1.7oz (48g)
Flanged - 1.9oz (53g)