參數資料
型號： MX29LV081TI-70
廠商： MACRONIX INTERNATIONAL CO LTD
元件分類： DRAM
英文描述： USB 2.0 Cable Assembly; Connector Type A:USB Type A Male; Connector Type B:5 Way Crimp RoHS Compliant: Yes
中文描述： 1M X 8 FLASH 3V PROM, 70 ns, PDSO40
封裝： 10 X 20 MM, PLASTIC, MO-142, TSOP1-40
文件頁數： 11/51頁
文件大小： 466K
代理商： MX29LV081TI-70
11
P/N:PM0717
MX29LV081
REV. 1.0, JUL. 31, 2001
READING ARRAY DATA
The device is automatically set to reading array data
after device power-up. No commands are required to
retrieve data. The device is also ready to read array data
after completing an Automatic Program or Automatic
Erase algorithm.
After the device accepts an Erase Suspend command,
the device enters the Erase Suspend mode. The sys-
tem can read array data using the standard read tim-
ings, except that if it reads at an address within erase-
suspended sectors, the device outputs status data. After
completing a programming operation in the Erase
Suspend mode, the system may once again read array
data with the same exception. See rase Suspend/Erase
Resume Commands” for more infor-mation on this mode.
The system
must
issue the reset command to re-en-
able the device for reading array data if Q5 goes high, or
while in the autoselect mode. See the "Reset Command"
section, next.
RESET COMMAND
Writing the reset command to the device resets the
device to reading array data. Address bits are don't care
for this command.
The reset command may be written between the se-
quence cycles in an erase command sequence before
erasing begins. This resets the device to reading array
data. Once erasure begins, however, the device ignores
reset commands until the operation is complete.
The reset command may be written between the se-
quence cycles in a program command sequence be-fore
programming begins. This resets the device to reading
array data (also applies to programming in Erase
Suspend mode). Once programming begins,however, the
device ignores reset commands until the operation is
complete.
The reset command may be written between the se-
quence cycles in an SILICON ID READ command
sequence. Once in the SILICON ID READ mode, the
reset command
must
be written to return to reading array
data (also applies to SILICON ID READ during Erase
Suspend).
If Q5 goes high during a program or erase operation,
writing the reset command returns the device to read-
ing
array data (also applies during Erase Suspend).
Pins
Manufacture code
Device code
Sector Protection
Verification
A0
VIL
VIH
X
X
A1
VIL
VIL
VIH
VIH
Q7
1
0
0
0
Q6
1
0
0
0
Q5
0
1
0
0
Q4
0
0
0
0
Q3
0
0
0
0
Q2
0
1
0
0
Q1
1
1
0
0
Q0
0
0
1
0
Code(Hex)
C2H
38H
01H (Protected)
00H (Unprotected)
TABLE 6. SILICON ID CODE
相關PDF資料
PDF描述
MX29LV081TI-90 8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY EQUAL SECTOR FLASH MEMORY
MX29LV081 10A 100V Schottky Rectifier; Package: TO-220AC 2 LEAD; No of Pins: 2; Container: Rail; Qty per Container: 50
MX29LV081TC-70 8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY EQUAL SECTOR FLASH MEMORY
MX29LV081TC-90 8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY EQUAL SECTOR FLASH MEMORY
MX29LV160BB 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY
相關代理商/技術參數
參數描述
MX29LV160BBTC-90 制造商:MX-COM Inc 功能描述:1M X 16 FLASH 3V PROM, 90 ns, PDSO48
MX29LV160CTTI-90G 制造商:Macronix International Co Ltd 功能描述:MX29LV Series 3 V 16 Mb (2M x 8/1M x 16) 90 ns Parallel Flash - TSOP-48
MX29LV160DBGBI-70G 制造商:Macronix International Co Ltd 功能描述:MX29LV Series 3 V 16 Mb (8M x 2 / 16M x 1) 70 ns Parallel Flash - xFLGA-48
MX29LV160DBTI-70G 功能描述:IC FLASH PAR 3V 16MB 70NS 48TSOP RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:MX29LV 標準包裝:1 系列:- 格式 - 存儲器:閃存 存儲器類型:閃存 - NAND 存儲容量:4G（256M x 16） 速度:- 接口:并聯 電源電壓:2.7 V ~ 3.6 V 工作溫度:0°C ~ 70°C 封裝/外殼:48-TFSOP（0.724"，18.40mm 寬） 供應商設備封裝:48-TSOP I 包裝:Digi-Reel® 其它名稱:557-1461-6
MX29LV160DBTI-70GTR 制造商:Macronix International Co Ltd 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*