- 您現在的位置：買賣IC網 > PDF目錄39723 > MP04HB780-44 (DYNEX SEMICONDUCTOR LTD) 782 A, 4400 V, SILICON, RECTIFIER DIODE PDF資料下載
參數資料
| 型號： | MP04HB780-44 |
| 廠商： | DYNEX SEMICONDUCTOR LTD |
| 元件分類： | 整流器 |
| 英文描述： | 782 A, 4400 V, SILICON, RECTIFIER DIODE |
| 封裝： | MP04, 3 PIN |
| 文件頁數： | 5/6頁 |
| 文件大?。?/td> | 0K |
| 代理商： | MP04HB780-44 |
5/6
www.dynexsemi.com
MP04XX780
PACKAGE DETAILS
For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
Recommended fixings for mounting: M6 socket head cap screws.
Nominal weight: 1580g
Module outline type code: MP04
MOUNTING RECOMMENDATIONS
Adequate heatsinking is required to maintain the base
temperature at 75C if full rated current is to be achieved. Power
dissipation may be calculated by use of V
T(TO) and rT information
in accordance with standard formulae. We can provide
assistance with calculations or choice of heatsink if required.
The heatsink surface must be smooth and flat; a surface finish
of N6 (32
in) and a flatness within 0.05mm (0.002") are
recommended.
Immediately prior to mounting, the heatsink surface should be
lightly scrubbed with fine emery, Scotch Brite or a mild chemical
etchant and then cleaned with a solvent to remove oxide build
up and foreign material. Care should be taken to ensure no
foreign particles remain.
An even coating of thermal compound (eg. Unial) should be
applied to both the heatsink and module mounting surfaces.
This should ideally be 0.05mm (0.002") per surface to ensure
optimum thermal performance.
After application of thermal compound, place the module
squarely over the mounting holes, (or ‘T’ slots) in the heatsink.
Fit and finger tighten the recommended fixing bolts at each end.
Using a torque wrench, continue to tighten the fixing bolts by
rotating each bolt in turn no more than 1/4 of a revolution at a
time, until the required torque of 6Nm (55lbs.ins) is reached on
all bolts at both ends.
It is not acceptable to fully tighten one fixing bolt before starting
to tighten the others. Such action may DAMAGE the module.
相關PDF資料 |
PDF描述 |
|---|---|
| MP101 | 10 A, 100 V, SILICON, BRIDGE RECTIFIER DIODE |
| MP15005 | 15 A, 50 V, SILICON, BRIDGE RECTIFIER DIODE |
| MP1504 | 15 A, 400 V, SILICON, BRIDGE RECTIFIER DIODE |
| MP1506W | 15 A, 600 V, SILICON, BRIDGE RECTIFIER DIODE |
| MP1508 | 15 A, 800 V, SILICON, BRIDGE RECTIFIER DIODE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MP04HB910 | 制造商:DYNEX 制造商全稱:Dynex Semiconductor 功能描述:Dual Rectifier Diode Module Preliminary Information |
| MP04HB910-22 | 制造商:n/a 功能描述:Diode Module |
| MP04HB910-24 | 制造商:DYNEX 制造商全稱:Dynex Semiconductor 功能描述:Dual Rectifier Diode Module Preliminary Information |
| MP04HB910-26 | 制造商:DYNEX 制造商全稱:Dynex Semiconductor 功能描述:Dual Rectifier Diode Module Preliminary Information |
| MP04HB910-28 | 制造商:DYNEX 制造商全稱:Dynex Semiconductor 功能描述:Dual Rectifier Diode Module Preliminary Information |
發布緊急采購，3分鐘左右您將得到回復。