參數資料
型號： ML9040A-AXXWA
廠商： OKI ELECTRIC INDUSTRY CO LTD
元件分類： 顯示控制器
英文描述： 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC81
封裝： ALUMINUM PAD, DIE-81
文件頁數： 11/49頁
文件大小： 515K
代理商： ML9040A-AXXWA
ML9040A-Axx/-Bxx
Semiconductor
19/49
PEDL9040A-03
Character Generator RAM (CG RAM)
The CG RAM is used to display user's original character patterns other than character
patterns in the CG ROM.
The CG RAM has a capacity (64 bytes = 512 bits) of writing 8 kinds of characters for 5 x 7
dots and 4 kinds of characters for 5 x 10 dots.
When displaying character patterns stored in the CG RAM, write 8-bit character codes (00
to 07 or 08 to 0F; hex.) on the left side as shown in Table 2. Then it is possible to output the
character pattern to the LCD display position corresponding to the DD RAM address.
The following explains how to write and read character patterns to and from the CG RAM.
(1) When the character pattern is 5 x 7 dots (see Table 3-1).
A method of writing character pattern to the CG RAM by CPU:
Three bits of CG RAM addresses 0-2 correspond to the line position of the character
pattern.
First, set increment or decrement by the CPU, and then input the CG RAM address.
After this, write character patterns to the CG RAM through DB0 - DB7 line by line.
DB0 to DB7 correspond to CG RAM data 0-7 in Table 3-1.
It is displayed when "H" is set as input data and is not displayed when "L" is set as
input data.
Since the ADC is automatically incremented or decremented by 1 after the writing of
data to the CG RAM, it is not necessary to set the CG RAM address again.
The line, in which the CG RAM addresses 0-2 are all "H" ("7" in hexadecimal
notation), is the cursor position. It is ORed with the cursor at the cursor position and
displayed to LCD.
For this reason, it is necessary to set all input data that become cursor positions to "L".
Although CG RAM data 0-4 bits are output to the LCD as display data, CG RAM data
bits 5-7 are not output. The latter can be written and read to and from the RAM, it
is therefore allowed to be used as data RAM.
A method of displaying the CG RAM character pattern to the LCD:
The CG RAM is selected when upper 4 bits of the character codes are all "L".
As character code bit 3 is invalid, the display of "0" in Table 3-1, is selected by
character code "00" (hex.) or "08" (hex.).
When the 8-bit character code of the CG RAM is written to the DD RAM, the character
pattern of the CG RAM is displayed on the LCD display position corresponding to
the DD RAM address. (DD RAM data, bits 0-2 correspond to CG RAM address, bits
3-5.)
相關PDF資料
PDF描述
ML9040A-BXXGA 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PQFP80
ML9040A-AXXWA 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC81
ML9040A-BXXWA 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC81
ML9041A-01ACVWA 17 X 100 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189
ML9041A-01ACVWA 17 X 100 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189
相關代理商/技術參數
參數描述
ML9040A-B01GAZ03A-7 功能描述:LCD 驅動器 LCD DOT Matrix Controller, 16/40 RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
ML9040A-BXX 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040A-BXXGA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040A-BXXWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-AXX 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*